Head problems
Thread Starter
Junior Member
Joined: Aug 2000
Posts: 18
Likes: 0
From: Tx
Head problems
Would appreciate any help identifing some heads. they are off of an 84 305, out of an 84 Camaro Berlinetta. Would like to know the valve size, and the flow numbers too if possible, and if they are a decent set of heads. the casting number is 140114416. thanks for any help you guys can give me
Member
Joined: Feb 2000
Posts: 322
Likes: 0
From: San Antonio, Tx
Car: 2001 Camaro Z28/1995 Camaro Z28
Engine: just a little 5.7(LS1-320/340 RW)
Transmission: SMOOOOOOTH T-56/Auto. . .
Axle/Gears: 3.42 and 2.73
www.mortec.com references those heads as being "14014416...80-86...305..........1.84"/1.5" valves, 58cc chambers"
so...hope this is what you wanted.
------------------
Duffster (age 31)
BEAT DOWN HARD 88' Camaro SC,
1978 Caprice Classic motor havin'(WITH NO COMPUTER),84' Z-28 Nose clip wearin',
84' Z-28 Hood covered,
AND THE TIRES:
245/60-16 Firehawk SS20 (1),
245/60-16 Bridgestone CompTA's(on rear),
235/60-16 Pirelli P600 w/a curb check or 3(1),
REAR HATCH MASTER OF ALL!!!
Duffster_Camaro@HOTMAIL.COM
Owner of the Camaro 0 out of 10 Third-genners approve of, also part of the non-existent Iowa crew.
so...hope this is what you wanted.
------------------
Duffster (age 31)
BEAT DOWN HARD 88' Camaro SC,
1978 Caprice Classic motor havin'(WITH NO COMPUTER),84' Z-28 Nose clip wearin',
84' Z-28 Hood covered,
AND THE TIRES:
245/60-16 Firehawk SS20 (1),
245/60-16 Bridgestone CompTA's(on rear),
235/60-16 Pirelli P600 w/a curb check or 3(1),
REAR HATCH MASTER OF ALL!!!
Duffster_Camaro@HOTMAIL.COM
Owner of the Camaro 0 out of 10 Third-genners approve of, also part of the non-existent Iowa crew.
Thread
Thread Starter
Forum
Replies
Last Post
84z96L31vortec
Tech / General Engine
7
Aug 20, 2017 12:16 AM
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM
84z96L31vortec
North East Region
1
Aug 10, 2015 08:27 PM
