Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

Update on problems

Thread Tools
 
Search this Thread
 
Old Jul 15, 2003 | 07:05 AM
  #1  
Diablo3Z28's Avatar
Thread Starter
Member
 
Joined: Feb 2002
Posts: 122
Likes: 0
From: Westland but still call Detroit home
Car: 1986 Camaro Z28
Engine: Built Vortec 350
Transmission: 700 R4
Update on problems

Well I finally got the pressure problem solved. I replaced the hose and clamp and removed the t-stat. No problems so far (crosses fingers). Before with the t-stat in if I drove around 3-5 mioles too much pressure would build up and blow the hose off and crack the reservoir bottle. So far yesterday after removing the t-stat I drove for about 20 miles without any problems. i have also had the fan rigged so it turns on when the key is in the on position.

Now my car is NOT shifting properly. It might just be the cable though. So I guess I will be trying that this afternoon. Wish me luck guys.

Symptoms: Slow acceleration, struggling to shift gears, poor gas mileage, bogging down sometimes

700r4 Trans, Holley Street Avenger Carb (670)

Any suggestions??
Reply
Old Jul 15, 2003 | 01:24 PM
  #2  
1986redbird's Avatar
Senior Member
 
Joined: Jan 2002
Posts: 943
Likes: 0
From: Chesapeake Va
you DID change the dist. when you put the Holley on didn't you?

without the computer carb. the ecm won't know how much to advance the timming (no power), you will have to run a standard HEI dist. in place of the cc-dist.

also the 700R4 lock-up is based on some info from the computer. (hint)
Reply
Old Jul 15, 2003 | 09:44 PM
  #3  
Diablo3Z28's Avatar
Thread Starter
Member
 
Joined: Feb 2002
Posts: 122
Likes: 0
From: Westland but still call Detroit home
Car: 1986 Camaro Z28
Engine: Built Vortec 350
Transmission: 700 R4
Yeah I changed the distributor initially. This is the first time I've encountered this problem. This is actually the second engine in the car and the HEI dist was one of the first things I did the first time around. I guess I'll just have to go to a Tranny shop. I really think that the tv cable just needs to be set though. I'll let you know tomorrow afternoon or Thursday
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
norcalz28
Northern California
26
Dec 7, 2016 12:49 PM
middian
Electronics
6
Sep 5, 2015 01:42 AM
andy74
Electronics
2
Sep 3, 2015 08:41 AM
Jackrabbit501
Electronics
1
Sep 2, 2015 09:14 PM
greenyone
TPI
3
Sep 2, 2015 03:39 PM




All times are GMT -5. The time now is 08:33 AM.