Dropped in my 350
Thread Starter
Member
Joined: Dec 2000
Posts: 178
Likes: 0
From: Saskatchewan,Canada
Dropped in my 350
I finally dropped in my 350. It's been bored out .030, The compression is 9.5 with aluminum flat tops. Speed Pro cam 222/222 @ .050 and .447/.447 lift , Heavily ported 882 heads, gasket matched Edelbrock Torker intake, Edelbrock performer 750 carb, headman headers, with glass packs and dual exaust exiting in front of rear tires. Any ideas on how much HP or torque this sep up is making?
Supreme Member
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
The old "151" cam...
Oh well, don't get me started.
------------------
"So many Mustangs, so little time..."
ICON Motorsports
Oh well, don't get me started.
------------------
"So many Mustangs, so little time..."
ICON Motorsports
Senior Member
Joined: Jan 2001
Posts: 527
Likes: 0
From: outerspace(maybe..pluto)?
about 300hp i HAD the exact same setup except for the proting and you rcompression is only 9:1 unles the heads are decked to!! this combo is heavily wrong!! i leared that first hand and am in the process of changing heads, cam and ignition read sig for more details that is a beter matched setup trust me!!!!
------------------
89 firebird formula
356 10.5:1compression
comp cams xe262 cam
performer rpm intake
#1405 edlebrock 600
434 casting completely redone with bronze guides and 202/160 valves 64cc chambers. decked .0005 thousandths
msd 6al
h.e.i. proform 50,000 volt vac. advance ditributor
700r-4 with 3.08 first gear and 3.23 posi 7 5/8 rear end.
b trans shift kit(will kill shifts...suck dong!!)
shorty heddman hedders with custom 3" pipe y-pipe back(no damn cat!) with 40 series flowmaster!
future mods: 406 roller REALLY REALLY REALLY RADICAL!!!!!
------------------
89 firebird formula
356 10.5:1compression
comp cams xe262 cam
performer rpm intake
#1405 edlebrock 600
434 casting completely redone with bronze guides and 202/160 valves 64cc chambers. decked .0005 thousandths
msd 6al
h.e.i. proform 50,000 volt vac. advance ditributor
700r-4 with 3.08 first gear and 3.23 posi 7 5/8 rear end.
b trans shift kit(will kill shifts...suck dong!!)
shorty heddman hedders with custom 3" pipe y-pipe back(no damn cat!) with 40 series flowmaster!
future mods: 406 roller REALLY REALLY REALLY RADICAL!!!!!
Senior Member
Joined: Jan 2001
Posts: 527
Likes: 0
From: outerspace(maybe..pluto)?
<font face="Verdana, Arial" size="2">Originally posted by RB83L69:
The old "151" cam...
Oh well, don't get me started.
</font>
The old "151" cam...
Oh well, don't get me started.
</font>
------------------
89 firebird formula
356 10.5:1compression
comp cams xe262 cam
performer rpm intake
#1405 edlebrock 600
434 casting completely redone with bronze guides and 202/160 valves 64cc chambers. decked .0005 thousandths
msd 6al
h.e.i. proform 50,000 volt vac. advance ditributor
700r-4 with 3.08 first gear and 3.23 posi 7 5/8 rear end.
b trans shift kit(will kill shifts...suck dong!!)
shorty heddman hedders with custom 3" pipe y-pipe back(no damn cat!) with 40 series flowmaster!
future mods: 406 roller REALLY REALLY REALLY RADICAL!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
Eric-86sc
Engine/Drivetrain/Suspension Parts for Sale
0
Aug 24, 2015 09:01 PM