I want to get a new intake, specifically one from summit...Edelbrock EDL-5001 , says its for Chevy 262-400, I wanna know if it will work on my 85 Z28 4bbl, does the intake have egr hookups on it ?

 

I would avoid the Torker II for a street engine with a relativly stock design. The Torker II is a single plane design with a not-so-recent intake runner design. I would look more to the dual plane intakes. Im not sure it the RPM has the EGR or not.

I know the ZZ series intake does (p/n 10185063). I have one of those on my floor and they look pretty decent.

 

whats a good range for the rpm, my car has headers, 350 cam and not much else as far as engine mods? The Edelbrock Performer RPS and Performer plus is dual plane, dont know if it would work though.

 

What do you mean by "350 cam?" A cam out of a 350? If so, a ZZ series like the one i posted would be good. Factory cams are like an idle-4000 or so RPM, maybe 4500. They aren't all that big. Definitly not something that screams single plane.

 

yes the cam is from a 350....where can i find the zz at>?

 

http://www.gmpartsdirect.com/

 

*oops double post*

 

Ok, not a bad price, any cheaper ones that will work just as well. I could afford it, just wondering what else is available. Thanks for the link.

I live in Canada, i dont know if they ship here?

 

ANy other ones that are recommended?

 

http://www.paceparts.com/product.asp?0=243&1=248&3=334

Or, watch for one of these on ebay, or the classifieds on this site.

 

Yep, that's the one i have on my floor (and the one that i posted above). They look like good pieces.

http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WD1V

That's the only one on eBay that i can find.

 

I have one on my block in between my heads. And on the motor in my car too.

 

So any other than the ones posted?