Will these heads work with my 91 z28 350 tpi

10088113

 

10088113...88-up...350..........Aluminum, 58cc, angle plug, raised
"D" port exhaust, 1.94"/1.5" valves


Yes it will bolt right up, only things of concern are the small chambers and D port exhaust.

 

those heads have the 86 and earlier intake bolt angles(yes I know 88 and up but the aluminum corvette heads used the old intake). they also have no crossover provision for egr.

 

I have these heads being done no w. Should I try them or just by a new set of victory jr's and go from there.

How are they as an overall head?
----------
How would I combat the egr provision

 

I don't know about tpi stuff. The carb manifolds can be modified, maybe so with the tpi. If I was you I'd be thinking about getting a 86 tpi intake from a junkyard or the classifieds. But I'd go to the tpi forum first and ask about that. The corvette had some kind of tube going from the exhaust manifold to the egr on the intake. If you're in California or some other smog-**** location you might have a problem with that.