Adjusting Idle
Thread Starter
Junior Member
iTrader: (2)
Joined: May 2003
Posts: 40
Likes: 0
From: DE
Car: 89 Formula 350
Engine: 355
Transmission: 700R4
Adjusting Idle
I finally got my motor in and running, its got a fairly large cam in it. I got a custom burnt chip from PCMforless. He told me he set the cold start idle to 1050, but the car doesnt want to idle at all, I have to keep my foot on the gas to keep it from stalling. He told me I might have to adjust my TPS.
My question is, whats the proper way to adjust the idle. Should I turn the idle screw a little bit to help it out, try checking the TPS voltage, maybe even adjusting it to a higher voltage? Should I look into the IAC? Do all three of these?
My question is, whats the proper way to adjust the idle. Should I turn the idle screw a little bit to help it out, try checking the TPS voltage, maybe even adjusting it to a higher voltage? Should I look into the IAC? Do all three of these?
Thread
Thread Starter
Forum
Replies
Last Post
