i need some serious help with my wipers i did the tbi to carb swap a while ago, wipers worked fine before, now i have the car up and running and now the wipers only travel about two inches on the windshield. i did remove one power wire from the loom that went to to wiper motor, on accident, but have since gotten power back the wiper motor.now the problem is that the rotator arm on the back of the motor doesnt turn the wiper linkage in a clockwise or counter-clockwise (not sure which way it turns?) manor is just stays horizontal all the way through the motion. if someone can understand this, let me know what is happening.