please help
Supreme Member
iTrader: (1)
Joined: Dec 2006
Posts: 2,403
Likes: 4
From: ms. gulf coast
Car: 91 R/S , 89 dodge p/u
Engine: L31 GM crate re-cammed , 318
Transmission: T-5 , 4 speed auto
Axle/Gears: 3.42 , ?
Re: please help
nice advice kingpin . mike , a little better info. on location would be good . if it's high up on eng. , good bet its valve cover gasket . if it's under exhaust manifold good bet it's oil press/fuel sensor . sensor is located just fwd. of oil filter .
Senior Member
iTrader: (1)
Joined: May 2007
Posts: 847
Likes: 0
From: Detroit
Car: 1989 Iroc-Z
Engine: 383 FFI
Transmission: TKO600
Axle/Gears: 3.42
Re: please help
lets see. My engine had some bad oil leaks when i first got it. When i opened the hood the smoke was coming from the passenger side. It ended up being a combination of things. First, my rear main seal was junk, but that was clear by all the oil splashed around the back of the engine when you look underneath. The second, and what it sounds like for you, was that the valve cover gasket was leaking in the back.




my point is made .