I have a lunati cam waiting to be installed, will i need any other parts to make this happen?, ive been told i'll need a roller timing chain, and new springs and rockers, is this true?, if so i'll order everything from lunati thanks again guys,

 

Which cam?

 

lunati 60101, 213/219 on the duration @.050, .454/.468 lift, 112/108 LSA/CL

 

All you absolutely need is the cam, lifters, gaskets, oil and a filter, but there's a lot you can do while it's all apart.

 

Thanks Apeiron!

 

Gotta have the cam and new lifters.

You'll almost certainly need the valve springs too; at least one of your stockers will probably break before you get backed all the way down your driveway with that thing.

Timing set, who knows,; when you get to where you can physically see your current one, you have to be the judge. I'm guessing .... you'll decide you'd like to put in a new one.

Other than that, it's pretty much a drop-in. At least in the short term.

 

A double roller timing chain will require some modification to the block for clearance.