sending unit wire
Thread Starter
Junior Member
Joined: Jul 2014
Posts: 24
Likes: 0
From: murfreesboro , TN
Car: 1983 Z28
Engine: LU5
Transmission: 700R4
sending unit wire
I have my sending unit cleaned up , bad pump removed and ready to mod for carb pick up.
I took apart the mechanism for float arm cleaned and it now reads from 1.87 - 89 ohms. While not perfect should give me a good idea how much gas I have left.
The wire from that mechanism to the connector on top of unit is frayed and the coating is coming off. Is there a certain type of wire I need to replace it with?
Purple wire in photo... ( picture was borrrowed from another post)
[IMG]
[/IMG]
I took apart the mechanism for float arm cleaned and it now reads from 1.87 - 89 ohms. While not perfect should give me a good idea how much gas I have left.
The wire from that mechanism to the connector on top of unit is frayed and the coating is coming off. Is there a certain type of wire I need to replace it with?
Purple wire in photo... ( picture was borrrowed from another post)
[IMG]
[/IMG] 
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
16
Jul 5, 2024 11:18 PM
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
