Total width of rear ends...89, 95 ? will it fit?
Thread Starter
Junior Member
Joined: Nov 1999
Posts: 54
Likes: 0
From: Grenada, Mississippi
Total width of rear ends...89, 95 ? will it fit?
Does anyone know the difference in the widths of the 89 rear(with drums) and a 95 rear (with disc) both out of camaros. I am looking to upgrade my 2.73 open rear to a posi 3.42 and I found a 95 rear that might work if it isn't different.
Also will my rims fit the bolt pattern and backspacing correctly on the 95 rear? My car is an 89 Iroc while the rear is out of a 95 Z28.
Also will my rims fit the bolt pattern and backspacing correctly on the 95 rear? My car is an 89 Iroc while the rear is out of a 95 Z28.
Member
Joined: Jul 1999
Posts: 437
Likes: 0
From: Atlanta, GA/ Clemson, SC
Car: 1991 Camaro Z28
Transmission: T56
The rear end out of the '95 (4th gen) is approximately 3-4 inches wider than the '89 (3rd gen). The bolt pattern is the same for the wheels. If you get wheels off of a 4th gen F-Body, they will fit perfectly on your car without sticking out.
------------------
1991 Z28 - 350 TPI, T56, McLeod street clutch, LT4 pressure plate, Pro 5.0 shifter, ported plenum & runners, AFPR, Hooker shorty headers w/o AIR, Flowmaster muffler, homeade ram-air, SSM subframe connectors, Kenny Brown STB, Global West steering box brace, Steve Spohn adjustable torque arm and T56 crossmember
------------------
1991 Z28 - 350 TPI, T56, McLeod street clutch, LT4 pressure plate, Pro 5.0 shifter, ported plenum & runners, AFPR, Hooker shorty headers w/o AIR, Flowmaster muffler, homeade ram-air, SSM subframe connectors, Kenny Brown STB, Global West steering box brace, Steve Spohn adjustable torque arm and T56 crossmember
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
I'llrocya
Interior Parts for Sale
3
Feb 2, 2016 11:43 PM
