t56 from early 4th gen in 3rd gen
#1
Junior Member
Thread Starter
Join Date: Dec 2012
Location: jacksonville fl
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1999 silverado 1989 iroc 1988 s10
Engine: 4.8,5.7,4.3
t56 from early 4th gen in 3rd gen
I was in the local yard by me and found an early 4th gen with what seems to be a t56 unknown whether its a v6 or v8 as I couldn't get the hood to open and it was about closing time anyway but my question is what all parts can I use off of it for a Manuel swap if any ?
#2
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,037
Received 1,666 Likes
on
1,264 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: t56 from early 4th gen in 3rd gen
This is BY FAR the most talked-about and popular trans swap on this forum.
There's enough material here already to write a book on the subject.
Read the sticky at the top of the forum; and the one in the FAQ page. Maybe let your eye trickle down this very page itself and see how much discussion there already is about this.
Then (a) once you've identified the transmission available to you, and (b) if there's anything left to know about what works and what doesn't and why and therefore whether the one in question will work for you, come back, and we'll try to answer specific questions.
There's enough material here already to write a book on the subject.
Read the sticky at the top of the forum; and the one in the FAQ page. Maybe let your eye trickle down this very page itself and see how much discussion there already is about this.
Then (a) once you've identified the transmission available to you, and (b) if there's anything left to know about what works and what doesn't and why and therefore whether the one in question will work for you, come back, and we'll try to answer specific questions.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM