Good Cams
#1
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Mar 2002
Location: San Antonio TX
Posts: 2,516
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1990 G92 IROC Z Miniram
Engine: 388cu 6.4 Liters
Transmission: G-Force T5
Axle/Gears: 3.73 Gears
Good Cams
This is for people who are looking for cams to use. Check out the websites http://www.holley.com/HiOctn/ProdLin...CC/Chevy5.html http://www.compcams.com/Technical/Ca...ML/128-169.asp
www.tpis.com
http://www.yearone.com/serverfiles/h...p?hid=G12AI427
https://www.thirdgen.org/newdesign/tech/mods3.shtml
These are good heads also, www.trickflow.com
You can also buy these cams through Summit or Jegs for a cheaper price.
www.tpis.com
http://www.yearone.com/serverfiles/h...p?hid=G12AI427
https://www.thirdgen.org/newdesign/tech/mods3.shtml
These are good heads also, www.trickflow.com
You can also buy these cams through Summit or Jegs for a cheaper price.
Last edited by VincentZ28; 02-01-2004 at 03:43 PM.
#2
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Mar 2002
Location: San Antonio TX
Posts: 2,516
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1990 G92 IROC Z Miniram
Engine: 388cu 6.4 Liters
Transmission: G-Force T5
Axle/Gears: 3.73 Gears
If you're still looking for a cam, I brought this link back from a year ago.
#5
TGO Supporter
iTrader: (3)
Join Date: Apr 2001
Location: Beaumont, CA
Posts: 2,364
Likes: 0
Received 0 Likes
on
0 Posts
Car: Moving...
Engine: Running...
Transmission: Shifting...
The LT4 is a very decent cam, I suppose with an LT1 intake is should be more of a perfect match than a Super Ram like my combination. Though of course it would be nice to get an LT4 intake If you think of getting a Super Ram I would check out the LPE cam
#7
Originally posted by Kevin91Z
Take this with a grain of salt, but every Desktop Dyno simulation I've done shows the LT4 HOT cam makes more power across the board versus the LPE219 cam. The HOT cam is also cheaper. Your results may vary.
Take this with a grain of salt, but every Desktop Dyno simulation I've done shows the LT4 HOT cam makes more power across the board versus the LPE219 cam. The HOT cam is also cheaper. Your results may vary.
Trending Topics
#8
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Mar 2002
Location: San Antonio TX
Posts: 2,516
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1990 G92 IROC Z Miniram
Engine: 388cu 6.4 Liters
Transmission: G-Force T5
Axle/Gears: 3.73 Gears
I brought this post back for the people who are looking for cams.
#10
Member
Join Date: Sep 2002
Location: CA
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28
Engine: LB9
Transmission: auto
Axle/Gears: 3.42
#12
Guest
Posts: n/a
Re: Good Cams
Well what else is new. Not much new right?
Now the point is which cam is best for the legal combo.
And I guess the vs area of noise is the Ex. factor is a down side? Less Rumble! But it's need.
In my guess with my combo and refrence to the Dyno result is the zz4 cam vortec combo produced the tq. But was in majorly needing the Hp.
Now the point is which cam is best for the legal combo.
And I guess the vs area of noise is the Ex. factor is a down side? Less Rumble! But it's need.
In my guess with my combo and refrence to the Dyno result is the zz4 cam vortec combo produced the tq. But was in majorly needing the Hp.
Thread
Thread Starter
Forum
Replies
Last Post
junkcltr
Tech / General Engine
6
08-02-2019 11:12 PM