ElectronicsNeed help wiring something up? Thinking of adding an electrical component to your car? Need help troubleshooting that wiring glitch?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Sorry no pictures of it, it came from a 91-92 TBI firebird, this was mounted behind the dash on the passenger side, and no its not the ecm, this is about 1/2 the size of the ecm.
I at first thought it ws the vats decoder but this box is metal like a ecm heres some numbers from it, IT ALSO HAS A SINGLE 24 PIN CONNECTOR ON IT
Well I found the plug I believe goes to this box, it's at the end of my dash harness and it looks like a ecm plug, however this plugs electrical wires are covered in yelow colored tape. Is this in fact part of the airbag electronics.
and while on airbags since this harness is already setup for it, I noticed when I pulled the harness from the 91 firebird there were two what I believe impact sensors under the center console, if I mounted these and whatever other ones I should be able to have a working airbag in my car right, or is there more involved to the system.