ElectronicsNeed help wiring something up? Thinking of adding an electrical component to your car? Need help troubleshooting that wiring glitch?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
electrical tile?! when people do this do they normally cut and shorten wires? i thought you just tucked them in the fenders or in the frame some how. when i bought my car the carb conversion was already done. i could use some help as far as what im using and what im not. is there a write up on this? i wasnt able to find one. thanks for the help.
this is my current set up. 350 with carb conversion. please dont judge me based on how dirty my engine is. i plan on cleaning it up within the next couple days. if i remove the harness will my cruise control, ac, gauges, fuel pump, and ignition will still work properly? just triple checking before i yank it out tomorrow. i know i will need to rig up something for my tc. i already have something in the works. thanks for the help.
Before you do anything, go look in the carb section. Read up, look at pictures, ask questions, and do some more research.and learn from other people build/mess ups.
Before you do anything, go look in the carb section. Read up, look at pictures, ask questions, and do some more research.and learn from other people build/mess ups.
mo
