09-28-2009, 09:22 PM
|
#1 |
| Member
Join Date: Sep 2003
Posts: 232
Car: 2011 6.2 Silverado, 88/85 camaro | overhead light
Hey Hey!
Hello everyone, thanks ahead of time!
Just wondering before I tear my dash apart if anyone can give some clues here. Why (and I have replaced all 3 bulbs today) would the overhead lights not work, the two separate lights with buttons and the center light?
Also, the light socket near the ECM, orange and white wire, when I put the bulb into the socket, the light goes on whether the car is started, lights turned on, its always on. I unplugged the light for now till that is figured out.
thanks everyone! | | |
__________________ 
Its not perfect, but fun and practical. Everything's boxed in, polygraphite bushings, zerks fittings, ported L98 block, heads, intake, plenum. No smog, heat, or ac. No carpet, no interior except for the dash, shifter, and a seat. Shorty headers into a y pipe, to a 3" Powerstick that dumps out before the axle
2004 gm luxo blue paint from ppg/sand blasted rear end, new rotors calipers front/rear/dropzone springs
kyb shocks/strutscontrol arms/trackbar boxed in with 3/16" steel plate./Chassis front to back stitch welded/Brake Ducts/Ram air-cold air from foglight location/De-screened MAF/hvhp oil pump. - no oil starvation yet/Moroso blue race wires/hypertech cap, coil, and rotor, the 55k volt package?/bosch 4 tip iridium plugs/Mobil 1 15-50 Synthetic/ TH350, non lockup with transgo 350-3 full manual kit |
 
|  |
If People Drove Any Slower They’d Be Going Backwards
