10-29-2009, 04:50 PM
|
#1 |
| Member
Join Date: Sep 2003
Posts: 232
Car: 2011 6.2 Silverado, 88/85 camaro | Cluster Nuts
Ok, the 10mm nuts for my gauge cluster are fubar, one missing, and the other just free spinning on the dash stud.
What is the thread size of the two studs at the bottom of the gauge cluster?
Thank you  | | |
__________________ 
Its not perfect, but fun and practical. Everything's boxed in, polygraphite bushings, zerks fittings, ported L98 block, heads, intake, plenum. No smog, heat, or ac. No carpet, no interior except for the dash, shifter, and a seat. Shorty headers into a y pipe, to a 3" Powerstick that dumps out before the axle
2004 gm luxo blue paint from ppg/sand blasted rear end, new rotors calipers front/rear/dropzone springs
kyb shocks/strutscontrol arms/trackbar boxed in with 3/16" steel plate./Chassis front to back stitch welded/Brake Ducts/Ram air-cold air from foglight location/De-screened MAF/hvhp oil pump. - no oil starvation yet/Moroso blue race wires/hypertech cap, coil, and rotor, the 55k volt package?/bosch 4 tip iridium plugs/Mobil 1 15-50 Synthetic/ TH350, non lockup with transgo 350-3 full manual kit |
 
|  |
