Difference in 487 and 487X SBC Heads
#1
Member
Thread Starter
Join Date: Feb 2001
Location: Muskegon, MI
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Difference in 487 and 487X SBC Heads
I got the info below from Mortec but it doesn't tell me a whole lot. Does anyone have any more info?
3973487....71-72...350..........used on 71-72 350 LT1, 75cc chamber
3973487X...71-72...350..........75cc chamber
Thanks
3973487....71-72...350..........used on 71-72 350 LT1, 75cc chamber
3973487X...71-72...350..........75cc chamber
Thanks
#3
Senior Member
Join Date: Sep 2001
Location: Cathlamet, Washington
Posts: 564
Likes: 0
Received 2 Likes
on
1 Post
Car: 87 Formula
Engine: 327
Transmission: 700r4
Axle/Gears: 3.23
I dont think theres any difference at all. I think the X just denotes that the head originally came on a corvette. Whereas the plain number was probably camaro.
#5
Member
Thread Starter
Join Date: Feb 2001
Location: Muskegon, MI
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Are they worth keeping?
I have a pair of the 487X's in my back yard ready for the 'Junk Yard'. Are they worth keeping?
Let me go on a bit. I've already built a 383 with A/M heads (Dart IE 200/72). A friend of mine is now building a 383, and I believe there is a little 'Monkey See- Monkey Do', but I spent some time at his garage the other day and dammed if he isn't going with a nice looking re-built set of 487X heads with Stainless Valves, etc.
Does that make sence? (See also my first statement)?
Let me go on a bit. I've already built a 383 with A/M heads (Dart IE 200/72). A friend of mine is now building a 383, and I believe there is a little 'Monkey See- Monkey Do', but I spent some time at his garage the other day and dammed if he isn't going with a nice looking re-built set of 487X heads with Stainless Valves, etc.
Does that make sence? (See also my first statement)?
#6
Supreme Member
It's possible that Jihn is correct, I recall the 461 and 461x castings of the mid 60's, and the "x" casting has larger intake ports.
Sorry, I've not heard of the 487's, but a trip to mortec.com or chevymania.com may yeild some info.
Sorry, I've not heard of the 487's, but a trip to mortec.com or chevymania.com may yeild some info.
#7
Member
Thread Starter
Join Date: Feb 2001
Location: Muskegon, MI
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
X = 10cc more intake volume
Thx for the lead on www.ChevyMania.com, here is what they say:
3973487 68-79 1.94/1.50 & 2.02/1.6 165-330 76 CC Chambers
3973487X casting has 10cc more intake volume.
Starting from a well weathered bare casting are they worth resurrecting, from the dead?
My intentions would be to use them on a budget 383 build. I already have a spare #010 4-Bolt ready to go, bored, decked and notched.
3973487 68-79 1.94/1.50 & 2.02/1.6 165-330 76 CC Chambers
3973487X casting has 10cc more intake volume.
Starting from a well weathered bare casting are they worth resurrecting, from the dead?
My intentions would be to use them on a budget 383 build. I already have a spare #010 4-Bolt ready to go, bored, decked and notched.
Thread
Thread Starter
Forum
Replies
Last Post
evilstuie
Tech / General Engine
22
01-09-2020 08:29 PM