All of these price do not include shipping.
1) Nitrous works set up for tpi (im not for sure but lt1). Kit has no jets in it, you will have to get them at your local shop. You will aslo need to get brackets, on/off switch, and activator for full throttle switch or have a butten when you want to you use it. (im going with a direct port set up from nx parts that i put together threw the years). everything works great! asking 175
http://i120.photobucket.com/albums/o...l/DSCF3657.jpg
http://i120.photobucket.com/albums/o...l/DSCF3656.jpg
http://i120.photobucket.com/albums/o...l/DSCF3655.jpg
http://i120.photobucket.com/albums/o...l/DSCF3652.jpg
http://i120.photobucket.com/albums/o...l/DSCF3651.jpg
2.) SWAP... from mas air flow to speed density! comes with a 730ecm, the jumper wire set that will plug right into your stock pre existing wires on your stock ecm, speed density knock sensor, and 2bar map sensor. asking 150
http://i120.photobucket.com/albums/o...l/DSCF3539.jpg
http://i120.photobucket.com/albums/o...l/DSCF3538.jpg
http://i120.photobucket.com/albums/o...l/DSCF3540.jpg
http://i120.photobucket.com/albums/o...l/DSCF3542.jpg
3.) 749 ecm! asking 50
http://i120.photobucket.com/albums/o...l/DSCF3546.jpg
4.) Msd blaster coil for tpi, and throttle body! asking 20
http://i120.photobucket.com/albums/o...l/DSCF3155.jpg
http://i120.photobucket.com/albums/o...l/DSCF3154.jpg
5.) 153 tooth 2 piece rearmain flywheel! asking 40
I HAVE 2 OF THESE AND I HAVE A COUPLE OTHER ONES, JUST ASK
http://i120.photobucket.com/albums/o...l/DSCF3183.jpg
6.) Sbc chrome valve covers. they say chevorolet with the bow tie simble
asking 20
http://i120.photobucket.com/albums/o...l/DSCF3161.jpg
http://i120.photobucket.com/albums/o...l/DSCF3160.jpg
7.) CRAN CAM 3/8 POLLY LOCKS, NEW STILL IN BOX! ASKING 20
http://i120.photobucket.com/albums/o...l/DSCF3158.jpg
http://i120.photobucket.com/albums/o...l/DSCF3157.jpg
8.) SET OF 4 GTA WHEELS REFINISHED AND HAND POLLISHED. ASKKING 400
http://i120.photobucket.com/albums/o...l/DSCF3141.jpg
9.) SBC 400. 511CASTING 2 BOLT MAINS. HAS LESS THAN 10K ON LAST REBUILD AND ITS READY FOR A SET OF HEADS AND CAM AND GO. SPEED PRO FORGED PISTONS, STOCK RODS, AND CRANK. ASKING 500
http://i120.photobucket.com/albums/o...l/DSCF3263.jpg
http://i120.photobucket.com/albums/o...l/DSCF3260.jpg
http://i120.photobucket.com/albums/o...l/DSCF3259.jpg
http://i120.photobucket.com/albums/o...l/DSCF3261.jpg
http://i120.photobucket.com/albums/o...l/DSCF3258.jpg
10.) SBC 400, 509 CASTING 2 BOLT MAINS. .40 OVER PISTONS. HAS LESS THAN 5K ON LAST REBUILD. NEEDS TO BE CLEANED AND NEW CRANK. ASKING 300
(dont have any pics right now but can get some if you ask)
11.) SBC 383. THIS IS A EAGEL KIT. SIR I BEAM RODS 5.7 IN LENGTH, CAST STEAL CRANK, AND KEITH BLACK PISTONS .30 OVER. 2 PISTONS ARE BROKE AND NEW ONES ARE $30 EACH NEW. GET THEM AT THE SAME WEIGHT AS THE OTHERS AND YOU CAN HAVE A BALENCED KIT. ASKING 300
http://i120.photobucket.com/albums/o...l/DSCF3573.jpg
http://i120.photobucket.com/albums/o...l/DSCF3572.jpg
http://i120.photobucket.com/albums/o...l/DSCF3571.jpg
12.) STOCK DISTRIBURTER FOR TPI OR THROTTLE BODY WITH A BRASS GEAR. ASKING 50
http://i120.photobucket.com/albums/o...l/DSCF3548.jpg
13.) SET OF 94 CAMARO RIMS ASKING 80
(dont have a pic right now but just ask)
i know this isnt a thirdgen car but i thought i would throw it out their. this is a 95 grand am gt 5 speed. It has a 2.3 liter quad 4 with a slight rod knock. 100 miles befor the knock it got a new headgasket, and a new clutch. this is black in color with 145 on the car. this car is very clean inside and out. only scratches in paint is on the hood. grey interior. im asking 800
http://i120.photobucket.com/albums/o...l/DSCF3275.jpg
http://i120.photobucket.com/albums/o...l/DSCF3272.jpg
http://i120.photobucket.com/albums/o...l/DSCF3268.jpg
http://i120.photobucket.com/albums/o...l/DSCF3266.jpg
http://i120.photobucket.com/albums/o...l/DSCF3265.jpg
http://i120.photobucket.com/albums/o...l/DSCF3264.jpg
http://i120.photobucket.com/albums/o...l/DSCF3586.jpg
http://i120.photobucket.com/albums/o...l/DSCF3584.jpg
http://i120.photobucket.com/albums/o...l/DSCF3583.jpg
http://i120.photobucket.com/albums/o...l/DSCF3582.jpg
http://i120.photobucket.com/albums/o...l/DSCF3581.jpg
http://i120.photobucket.com/albums/o...l/DSCF3580.jpg
http://i120.photobucket.com/albums/o...l/DSCF3579.jpg
http://i120.photobucket.com/albums/o...l/DSCF3578.jpg
1) Nitrous works set up for tpi (im not for sure but lt1). Kit has no jets in it, you will have to get them at your local shop. You will aslo need to get brackets, on/off switch, and activator for full throttle switch or have a butten when you want to you use it. (im going with a direct port set up from nx parts that i put together threw the years). everything works great! asking 175
http://i120.photobucket.com/albums/o...l/DSCF3657.jpg
http://i120.photobucket.com/albums/o...l/DSCF3656.jpg
http://i120.photobucket.com/albums/o...l/DSCF3655.jpg
http://i120.photobucket.com/albums/o...l/DSCF3652.jpg
http://i120.photobucket.com/albums/o...l/DSCF3651.jpg
2.) SWAP... from mas air flow to speed density! comes with a 730ecm, the jumper wire set that will plug right into your stock pre existing wires on your stock ecm, speed density knock sensor, and 2bar map sensor. asking 150
http://i120.photobucket.com/albums/o...l/DSCF3539.jpg
http://i120.photobucket.com/albums/o...l/DSCF3538.jpg
http://i120.photobucket.com/albums/o...l/DSCF3540.jpg
http://i120.photobucket.com/albums/o...l/DSCF3542.jpg
3.) 749 ecm! asking 50
http://i120.photobucket.com/albums/o...l/DSCF3546.jpg
4.) Msd blaster coil for tpi, and throttle body! asking 20
http://i120.photobucket.com/albums/o...l/DSCF3155.jpg
http://i120.photobucket.com/albums/o...l/DSCF3154.jpg
5.) 153 tooth 2 piece rearmain flywheel! asking 40
I HAVE 2 OF THESE AND I HAVE A COUPLE OTHER ONES, JUST ASK
http://i120.photobucket.com/albums/o...l/DSCF3183.jpg
6.) Sbc chrome valve covers. they say chevorolet with the bow tie simble
asking 20
http://i120.photobucket.com/albums/o...l/DSCF3161.jpg
http://i120.photobucket.com/albums/o...l/DSCF3160.jpg
7.) CRAN CAM 3/8 POLLY LOCKS, NEW STILL IN BOX! ASKING 20
http://i120.photobucket.com/albums/o...l/DSCF3158.jpg
http://i120.photobucket.com/albums/o...l/DSCF3157.jpg
8.) SET OF 4 GTA WHEELS REFINISHED AND HAND POLLISHED. ASKKING 400
http://i120.photobucket.com/albums/o...l/DSCF3141.jpg
9.) SBC 400. 511CASTING 2 BOLT MAINS. HAS LESS THAN 10K ON LAST REBUILD AND ITS READY FOR A SET OF HEADS AND CAM AND GO. SPEED PRO FORGED PISTONS, STOCK RODS, AND CRANK. ASKING 500
http://i120.photobucket.com/albums/o...l/DSCF3263.jpg
http://i120.photobucket.com/albums/o...l/DSCF3260.jpg
http://i120.photobucket.com/albums/o...l/DSCF3259.jpg
http://i120.photobucket.com/albums/o...l/DSCF3261.jpg
http://i120.photobucket.com/albums/o...l/DSCF3258.jpg
10.) SBC 400, 509 CASTING 2 BOLT MAINS. .40 OVER PISTONS. HAS LESS THAN 5K ON LAST REBUILD. NEEDS TO BE CLEANED AND NEW CRANK. ASKING 300
(dont have any pics right now but can get some if you ask)
11.) SBC 383. THIS IS A EAGEL KIT. SIR I BEAM RODS 5.7 IN LENGTH, CAST STEAL CRANK, AND KEITH BLACK PISTONS .30 OVER. 2 PISTONS ARE BROKE AND NEW ONES ARE $30 EACH NEW. GET THEM AT THE SAME WEIGHT AS THE OTHERS AND YOU CAN HAVE A BALENCED KIT. ASKING 300
http://i120.photobucket.com/albums/o...l/DSCF3573.jpg
http://i120.photobucket.com/albums/o...l/DSCF3572.jpg
http://i120.photobucket.com/albums/o...l/DSCF3571.jpg
12.) STOCK DISTRIBURTER FOR TPI OR THROTTLE BODY WITH A BRASS GEAR. ASKING 50
http://i120.photobucket.com/albums/o...l/DSCF3548.jpg
13.) SET OF 94 CAMARO RIMS ASKING 80
(dont have a pic right now but just ask)
i know this isnt a thirdgen car but i thought i would throw it out their. this is a 95 grand am gt 5 speed. It has a 2.3 liter quad 4 with a slight rod knock. 100 miles befor the knock it got a new headgasket, and a new clutch. this is black in color with 145 on the car. this car is very clean inside and out. only scratches in paint is on the hood. grey interior. im asking 800
http://i120.photobucket.com/albums/o...l/DSCF3275.jpg
http://i120.photobucket.com/albums/o...l/DSCF3272.jpg
http://i120.photobucket.com/albums/o...l/DSCF3268.jpg
http://i120.photobucket.com/albums/o...l/DSCF3266.jpg
http://i120.photobucket.com/albums/o...l/DSCF3265.jpg
http://i120.photobucket.com/albums/o...l/DSCF3264.jpg
http://i120.photobucket.com/albums/o...l/DSCF3586.jpg
http://i120.photobucket.com/albums/o...l/DSCF3584.jpg
http://i120.photobucket.com/albums/o...l/DSCF3583.jpg
http://i120.photobucket.com/albums/o...l/DSCF3582.jpg
http://i120.photobucket.com/albums/o...l/DSCF3581.jpg
http://i120.photobucket.com/albums/o...l/DSCF3580.jpg
http://i120.photobucket.com/albums/o...l/DSCF3579.jpg
http://i120.photobucket.com/albums/o...l/DSCF3578.jpg
i'll take the nitrous and stroker kits. total with shippng to jj.johnson@mountainhome.af.mil and your paypal info.
James
USAF!
James
USAF!
sent u some more pics!
the 511 block is sold
nitrous kit is sold!
