Two tpi setups- 1. 1988 maf. Manifold, injectors, wiring computer, distributor, should have everything. This one isn't mine, I'm posting for a friend. $350/offer
2. 1992 Speed density. no wiring, no injectors. has manifold, computer, and distributor. 300/offer
Serpentine setups off same cars. 1992 is complete- $200, 1988 is missing alternator, otherwise complete-$175.
1992 1pc rear main block, never bored, still has cross hatches on cylinder walls-$150
1pc rear main factory oil pan-$20
Two v8 T5 bellhousings-$25 each
prefer pickup, but can ship most items. Thanks, Ryan
2. 1992 Speed density. no wiring, no injectors. has manifold, computer, and distributor. 300/offer
Serpentine setups off same cars. 1992 is complete- $200, 1988 is missing alternator, otherwise complete-$175.
1992 1pc rear main block, never bored, still has cross hatches on cylinder walls-$150
1pc rear main factory oil pan-$20
Two v8 T5 bellhousings-$25 each
prefer pickup, but can ship most items. Thanks, Ryan
Also, 1992 700r4 trans with converter. Shifts funny, about 12,000 mi on rebuild. Holds shifts out to long under part throttle and shifts hard, under wide open throttle shifts late, but shifts slowly into next gear. May need rebuilt again. $150
ttt
Member
Andy 91GTA
Member
close
- Join DateFeb 2000
- LocationNorth Battleford, Saskatchewan, Canada
- Posts:339
- iTrader Positive Feedback100
- iTrader Feedback Score(2)
- Car91 GTA & 92 GTA & 92 GTA
- Engine305 TPI & 350 TPI & 350 TPI
- Transmission700R4
- Axle/Gears3.42 & 3.23 & 3.23
- Likes:0
- Liked:0 Times in 0 Posts
I am restoring a yellow 92 GTA and I am looking for the 14 mm bolt and metal clip that holds the alternator wiring. I believe that all 88-92 TPI cars came with these parts. There is no part numbers available for these parts so I am looking for good condition, rust free parts. Below is a picture for the bolt and clip.

I am also looking for 3 throttle body coolant clamps for 1985-92 TPI cars. I have tried buying them new but the 2 part numbers I have are for worm style clamps. I am looking for clamps in good condition that aren't rusty. Here are some pics:



Let me know if you have these parts. Thanks.

I am also looking for 3 throttle body coolant clamps for 1985-92 TPI cars. I have tried buying them new but the 2 part numbers I have are for worm style clamps. I am looking for clamps in good condition that aren't rusty. Here are some pics:



Let me know if you have these parts. Thanks.
The hose clamps were long gone, high milage cars, and I don't recall seeing the wiring clip either, sorry. Ryan