SUPER CHARGED HSR DISCHARGE TUBE QUEST
 

Hello I have a Vortech super charger. It is a 88 tpi set up. I pulled my TPI unit and installed HSR. The HSR sits higher. Is there a bolt on discharge tube? I am not running intercooler at this time. thanks

Re: SUPER CHARGED HSR DISCHARGE TUBE QUEST
 

Re: SUPER CHARGED HSR DISCHARGE TUBE QUEST
 

Anyone have a picture of there super charged HSR with intake tube?

Re: SUPER CHARGED HSR DISCHARGE TUBE QUEST
 

could try this for now till you get your intercooler in http://www.trickflow.com/egnsearch.a...5&autoview=sku

Re: SUPER CHARGED HSR DISCHARGE TUBE QUEST
 

Could also clock the housing a bit and use about a 30* elbow silicone coupler.

Re: SUPER CHARGED HSR DISCHARGE TUBE QUEST
 

Might hit the hood.

I'd just use a rubber or metal 90* bend meant for a 3" pipe to 4" oval (TPI/LT1 throttle body) and run a tube right into the blower.

I might have some pictures somewhere I can post. I ran that blower with a lot of different intake combos.

Actually, I also ran a miniram on my corvette with a blower and I think I used the same thing I'm suggesting on that car before sticking a singleplane on it.

-- Joe

Re: SUPER CHARGED HSR DISCHARGE TUBE QUEST
 

looks like it might align if you extend/replace the coupler from TB to the whatever it is called with a longer one? Is that coupler you are using available in a longer lenght then cut to size?