Fat Tires...Post Em I'm bored, lets see the Z's with big fat tires out back...275's or bigger please...they look so exotic and sexy! |
u first!! ;) |
more like white trash, cars dont look good with tires sticking out... |
Originally posted by DanTheMan_smlk more like white trash, cars dont look good with tires sticking out... I personally like fat tires...im not white trash either. |
1 Attachment(s) https://www.thirdgen.org/techbb2/sho...ght=wide+tires sorry guys, didn't realize there was already a thread about this...but i got a few that aren't in that thread..i haven't yet done this to my car, but the day will come...still debating on 18's or skinny/fatties...girl's like the 18's, guys like the fatties....stuck in a tough decision there... |
1 Attachment(s) just cuz you got fat tires doesn't mean they have to stick out...theres documents of people shoving 335's under and inside the fenders.. |
i shove 28x10.50 slicks under mine all the time. :p i think i have pics on my cardomain site of when the car was in pieces, but who knows. |
My baby has wide tires on her, but they don’t stick out. I personally like them. |
Hate to break it to you guys, but those tires do stick out. Our cars were designed to have the wheels tucked inside the fender, not flush with them. Im all for wide tires, I just prefer the tucked look and am yet to see some fat ones tucked the right way. To each his own. :thumbsup: |
Originally posted by klumb15 just cuz you got fat tires doesn't mean they have to stick out...theres documents of people shoving 335's under and inside the fenders.. |
1 Attachment(s) I will show mine, but I guess I am "WHITE TRASH" to some of you. 295/50r15 on 15x10 rim with 4 1/4in. backspace. |
1 Attachment(s) I respect the "tucked" look. But I honestly think you guys that are HARDCORE TUCK lovers, need to take it easy. When a tire is .5 inches further out than stock it does not constitute the THOSE STICK WAAAYY OUT comments. IMHO when you stay stuff like that, you sound very close minded. Remeber we are MODing our cars. If we want them stock then 99% of us would not need to be on this website. IT IS SUPPOSED TO LOOK DIFFERNT. Anyways, now that I got that off my chest. I will post a pic of my tires now. Ther are 335's on 11" rims, mounted to a stock width moser 12 bolt. I am happy to say that I DO think they stick out too much, but once I put 315s on there, they should be fine. And I do not think it looks white trashy at all. I was going to go through a ton of work to try and get them to tuck more, and everyone that I have shown that liver around here (Needham, MA) have told me to not touch them. People say it looks mean. So I will run these till they wear out. Then go with 315s (goodyear eagle G1s) I think they are called. here is the pic and I will put on a racing suit to help protect me from the flames.....fire |
1 Attachment(s) By the way, the car is a 91, so the aero GFX are not on yet, they will change the look of a chot from this angle a lot. I will toss another pic on, to get a better idea of the set up. |
Hi all, Glad to see that my car was one of the first that came to mind in this thread. :D I've got 315's shoved under my car, they stick out less than 1/4" on each side from the fender well. I agree that they should be inside the wheel well... however I am def. not a stock nazi. The 1/4" on each side will be fixed when I buy my new rear end. http://www.rochesterfbodyclub.net/kodak/12.jpg http://www.rochesterfbodyclub.net/kodak/13.jpg |
DM0.. those tires are sickenly fat, I love'em!! |
Originally posted by Brisk DM0.. those tires are sickenly fat, I love'em!! http://www.rochesterfbodyclub.net/kodak/5.jpg http://www.rochesterfbodyclub.net/kodak/7.jpg http://www.rochesterfbodyclub.net/kodak/9.jpg http://www.rochesterfbodyclub.net/kodak/10.jpg |
wow, that is a really sharp camaro you got. i got 275/60sr15's. http://memimage.cardomain.net/member...626_2_full.jpg http://memimage.cardomain.net/member...626_4_full.jpg http://memimage.cardomain.net/member...626_8_full.jpg they stick out where the gfx are, but they dont stick out all the way at the top. looks pretty good from right behind from a looking up angle. ive been thinking about going with stock rims and tires and I cant make up my mind!!! |
I'm going to take the opposite stance and say that I like the "slightly sticking out or at least flush with the fender flares" look. I've always hated the way our stock wheels tuck into the fenders too far and I was definitely a happy camper when I saw just how well my 275 tires filled in my fender flares. I have to say I didn't like the old 4th-gen-rear-with-3rd-gen-wheels look after a few months (if anyone has ever done this then you'll understand) but I hated the old stock look even more. To me I have never understood why anyone would want their tires to tuck in to the fender wells and not be flush with the fender flares, despite whether it's true or not, from a looks standpoint a wider stance signifies a higher performance car (just as a lower car does) and tucking the tires into the fender wells makes the car have a narrower stance Just my two cents... That being said, I have no real good pics showing off the 275s in the back of my car, but it's not that impressive anyway. Now the 275s in the front don't look any more or less impressive but is really where the beauty of the 275s shows through. :thumbsup: http://justin.fastlanehw.com/firebir...y/DSCN2750.jpg |
i love the flush look...thast why i got 2.25" spacers for my 18's...hopefully that does the trick and makes them flush....i like it how on the bottom, the body curves inward, and the wide section of tread is exposed...looks mean... |
i love fat tires in the rear, especially when the rear is sitting higher than the front. and i dont consider myself white trash at all. only reason why i dont have that setup is so i can rotate my tires. someday tho. DigitalMonarch0, you have a damn good lookin camaro. those tires look like C5 tires lol |
how big of tire can you run on a 8" wide rim without it looking stupid, like a balloon....can you run a 275 and keep it looking half way decent? otherwise i gotta run 245's all the way around... |
Originally posted by klumb15 how big of tire can you run on a 8" wide rim without it looking stupid, like a balloon....can you run a 275 and keep it looking half way decent? otherwise i gotta run 245's all the way around... http://memimage.cardomain.net/member...3_522_full.jpg http://memimage.cardomain.net/member...3_691_full.jpg |
1 Attachment(s) 275 35 18 the next size will be 285 35 18 . |
how wide are those rims 18inchboyds? |
Anybody else think it is kinda hard to tell what "sticking out", "tucked" is since our cars have such a great difference in width from the top of the quarter flare, to the lower middle part just before the GFX? |
you gotta look at the top of the tire, and the top middle of the fender...i also think GM tucked them in too far... |
its a 9.5 inch rim , if i had to do it over again id get a 18x9.5 with 6 inches bs and run a 295 35 18 . I want to run a 275 40 18 for the next set of rears but i know they will hit , i was gonna buy the eastwood fender rolling tool but i think the tire will hit the top of the inner fender. Btw off topic does anyone know how much it is to have a rim rehooped from boyd coddington if i wanted mine to stick in a little further. |
275/40-17s front and rear. :) http://home.columbus.rr.com/billsgar...7Solo2005a.jpg |
295/35/18 the right way looks great! :thumbsup: |
335's soon to be 315's Moded the right way looks great too! :thumbsup: |
beauty is in the eye of the beholder but it's a good thing you have 17's as you have alot of work to do to fit the tire let alone that rim right. that's half the fun though. :thumbsup: |
I've got 28x11.5 ET streets that look great althought they dont hook for crap, going full slick hope I don't get caught in the rain lol. no pic yet couldn't download for some reason. |
How do you fit 275s up front? My 245s can rub slightly if I want them to. I'll try and get some pics of my rear tires up tonight, my 275s are pretty tucked in. Using 4th gen rear/wheels is probably the reason why. |
here some 295's i finally got some pics for you guys to see..............http://img312.imageshack.us/img312/9...o7210028pc.jpg |
but i like my 275's better and this look... http://img105.imageshack.us/img105/7...o7210078ba.jpg http://img105.imageshack.us/img105/7...o7210078ba.jpg what do you guys think..? |
1 more |
I dont consider it "sticking out" unless the tires actually stick out past the lip of the fender. I prefer the look I call "flush" where the tire fits perfectly under the lip of the fender, almost as if the fender is hugging the tire. I really dont like the "tucked in" look, I think it dosnt look as sporty. To each their own right? Here's mine w/ 275/35/18 rear: http://www.omnipotent-goku.com/iroc/...9/DSC01224.jpg |
1 Attachment(s) I think they tuck pretty well: 275/40/18 |
1 Attachment(s) again........ |
1 Attachment(s) no sticking out.......... |
omg...these pictures, thanks for the good laugh :thumbsup: especially dennisbernal91z this is just not my cup of tea |
Sorry you must be cooler than us "white trash types". Guess you don't like traction. |
HMMMMMMMMM I wonder why hes on probation.....its got me stumped! My C5 must be white trash lol |
295/50/16's on a set of 85-87 irocs. they are roughly 27.7" tall and about 10" wide. i like them alot! http://memimage.cardomain.net/member...1_197_full.jpg edit: this is a dirty picture, but you can see how well these tires tuck in this picture...flush/tuck...whatever! http://memimage.cardomain.net/member...1_198_full.jpg one more for good measure of the whole car: http://memimage.cardomain.net/member...1_196_full.jpg |
Whatever DanTheMan_smlk. I said I wasn't done trying to get them to fit. But at least I am trying something. What are you doing that is so "outside the box"? Nothing? Thats what I thought. Shut the hell up and get off these boards. The thread is for pics of people's set ups, not smart *** comments by immature, pre-pubesant little boys. So move on and go play with your hot wheels. By the way, I am thinking just not worrying about the stick out and buying the Danko wide panels. The makes the rear of the body 1.5" wider. More than enough. What do you guys think. only 275 for the panels at their site. I think this is the easiest fix. i am pretty sick of cutting and hammering away. i am out of space. the springs are there and so is the frame. I might get more room with coilovers, but I don't wanna cut into the frame. 95% sure about the WB panels for me. I love the huge tires too much to go to anything thinner than 315. With the WB stuff I should be able to run 335 so prob. |
Originally posted by dennisbernal91z Whatever DanTheMan_smlk. I said I wasn't done trying to get them to fit. But at least I am trying something. |
i have a 8in wide rim what is the max size tire you can put on that, im looking to put 275's. Thanks BTW, DigitalMonarch0, how did you get your front tires too line up with the upper fender so well...Spacers? |
Who sells 275/50r16 or 275/45r16 tires? |
Originally posted by BT283 BTW, DigitalMonarch0, how did you get your front tires too line up with the upper fender so well...Spacers? The difference being that an adapter bolts onto the hub and a spacer just sits in between with no attachment. |
|
All times are GMT -5. The time now is 01:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands