|
Thirdgen.org stickers!!!!! I was over at Las Vegas F-Body ( http://www.lvfbody.com/ ) and was checking out Matthew Guimond's bada** 99Z28 and noticed he had a small sticker on the side of his rear glass. It's his websight logo. And I loved the style and look so I'm gonna have one made for my car after I get my windows tinted. I think the size and placement are just right. Not overdone but still noticeable and you could even color match your car. Here's my design of the sticker. http://www.webphotos.com/member/10494/245294.JPG And here's some pics of Matthew's car and note the location of the sticker. I Like https://www.thirdgen.org/messgboard/biggrin.gif http://www.lvfbody.com/images/member..._GUIMOND_2.jpg http://www.lvfbody.com/images/member..._GUIMOND_0.jpg Travis Whidden's 98Z28 http://www.lvfbody.com/images/member..._WHIDDEN_5.jpg ------------------ Trans Am: (Engine)305 TPI 180 Degree Thermostat JET Fan Switch TB Bypass Accel 300+ 8.8 Racing Wires Accel Super Coil Bosch Platinium Plugs Custom Ram Air with K&N Removed Emissions Equipment & Cat. (Stereo)Full Kenwood Excelon System See my Ride: https://www.thirdgen.org/rides/index...ew&rideid=1324 Member at kyfbodies.org |
I sent Matthew an e-mail asking him if it was ok to use their logo as a template for our sticker design. I just recieved an e-mail from Matthew. Goes as follows: Hey, thanks for the compliment...Although I not too sure the other members of the 3rd gen board will like my car as much as you do!:-) I dont mind you borrowing the style of our club decals at all. As a matter of fact, I could send you one if you like, to use as a template. I dont have a decal in front of me, so Im not positive of the size...but I would guess they are about 7 inches long and about 2 and a half inches tall. Also... If you would want, I could have them made for you. In any colors you want. With shipping to you, or to whoever wants them, they would be about $1.50 Matthew M. Guimond (CrkHedMat) each. If there is anyting else I can do to help, please let me know. Matt Matthew M. Guimond (CrkHedMat) President & Founder Of: Las Vegas F-Body Association. www.LVFBody.com Owner: www.CrkHedMat.com Moderator @ www.CamaroZ28.com I just sent another e-mail asking him to have a couple made for my car. What do all of you think? Anyone else interested? If you don't mind drop by his site http://www.lvfbody.com/ and check it out. While you're there drop by the Guestbook and say thanks. John ------------------ Trans Am: (Engine)305 TPI 180 Degree Thermostat JET Fan Switch TB Bypass Accel 300+ 8.8 Racing Wires Accel Super Coil Bosch Platinium Plugs Custom Ram Air with K&N Removed Emissions Equipment & Cat. (Stereo)Full Kenwood Excelon System See my Ride: https://www.thirdgen.org/rides/index...ew&rideid=1324 Member at kyfbodies.org [This message has been edited by jobryan26 (edited August 06, 2001).] |
Hey, as a member of LV Fbody i can say 1) CrkHedMat is a cool guy as long as you dont piss on his house (inside joke) 2) i can take pics of the LVF logos on my 96 if you want.. or you can see some pics on the site, member #98.... good pics, but hard to see the stickers... ------------------ Arthur- 1985 IROC Restoration In Progress http://www.thirdgenfbody.com/projiroc/ Member # 98 of The Las Vegas F-Body Association www.lvfbody.com [This message has been edited by Thirdgenfbody.com (edited August 06, 2001).] |
U can't do that because ThirdGen.Org is Dirk's site. If any1 is going to make merchandise, it has to be him or no1 since he owns it. ------------------ 89 RS STILL Looking For: An 87 IROC-Z28 350 TPI |
Yes I understand that Dirk has final say since it's his site and a great one at that. My only reason for posting this was in an effort to help find a sticker design that everyone would like and then Dirk would see and decide if he approved. And my reason for asking Matthew was cause I was modifying his Website Logo or sticker, so I asked for his permission before I did so. He said "ok". This is only a "suggestion". Matthew was just being a gentleman by offering to make the stickers. He was not asked. Sorry if you took it the wrong way. John ------------------ Trans Am: (Engine)305 TPI 180 Degree Thermostat JET Fan Switch TB Bypass Accel 300+ 8.8 Racing Wires Accel Super Coil Bosch Platinium Plugs Custom Ram Air with K&N Removed Emissions Equipment & Cat. (Stereo)Full Kenwood Excelon System See my Ride: https://www.thirdgen.org/rides/index...ew&rideid=1324 Member at kyfbodies.org [This message has been edited by jobryan26 (edited August 06, 2001).] |
IROCZTWENTYGR8 hit the head on the nail. Hes not letting anybody make them. Owell.... Eric ------------------ My 1986 Z28 GM350, T-5, 3.23's, lots of go fast goodies, 4th gen Firebird interior etc... 85 IROC w/ 1364 miles! You'll always find what you've lost in the last place you look R.I.P Dale Earnhardt |
<font face="Verdana, Arial" size="2">Originally posted by Thirdgenfbody.com: Hey, as a member of LV Fbody i can say 1) CrkHedMat is a cool guy as long as you dont piss on his house (inside joke) 2) i can take pics of the LVF logos on my 96 if you want.. or you can see some pics on the site, member #98.... good pics, but hard to see the stickers... </font> ------------------ Trans Am: (Engine)305 TPI 180 Degree Thermostat JET Fan Switch TB Bypass Accel 300+ 8.8 Racing Wires Accel Super Coil Bosch Platinium Plugs Custom Ram Air with K&N Removed Emissions Equipment & Cat. (Stereo)Full Kenwood Excelon System See my Ride: https://www.thirdgen.org/rides/index...ew&rideid=1324 Member at kyfbodies.org [This message has been edited by jobryan26 (edited August 06, 2001).] |
I may be speaking out of context but I don’t think Dirk would care if you made your own. I am sure he is just concerned about people making a profit on the Thirdgen name. This is just my opinion so don’t hold me to this. ------------------ 88 IROC convertible -=ICON Motorsports=- |
nevermind [This message has been edited by Jza (edited August 06, 2001).] |
That Decal looks tough. See ya Mike ------------------ MY SITE: <html> <font size="3"> <a href="http://albums.photo.epson.com/j/AlbumIndex?u=1762667&a=13599419">My GTA's & TransAm Pics</a> </font> </html> (Gran Turismo Americano) "The Ultimate Firebird" Smokin 1989 GTA- Bone stock except for exhaust. (no catalytic-stainless pipe into Flowmaster 2 chamber) & AC Delco Rapid Fire Plugs |
here you are http://www.thirdgenfbody.com/scrapbo...)/dcp_0280.JPG http://www.thirdgenfbody.com/scrapbo...)/dcp_0281.JPG more pics at <a href="http://www.thirdgenfbody.com/scrapbook/" target="new">http://www.thirdgenfbody.com/scrapbook/</a> ------------------ Arthur- 1985 IROC Restoration In Progress http://www.thirdgenfbody.com/projiroc/ Member # 98 of The Las Vegas F-Body Association www.lvfbody.com |
Thirdgenfbody.com thanks for the pic. I do love it but it needs the "www.thirdgen.org" maybe underneath the sticker you have. Like the actual Website Logo. Chuck thanks for you thoughts on this subject but I would want Dirks approval before I decided to have one made athough I don't think he'd mind as long as noone was getting profit from it. It's just the right thing to do. Anymore thoughts or opinions. ------------------ Trans Am: (Engine)305 TPI 180 Degree Thermostat JET Fan Switch TB Bypass Accel 300+ 8.8 Racing Wires Accel Super Coil Bosch Platinium Plugs Custom Ram Air with K&N Removed Emissions Equipment & Cat. (Stereo)Full Kenwood Excelon System See my Ride: https://www.thirdgen.org/rides/index...ew&rideid=1324 Member at kyfbodies.org |
| All times are GMT -5. The time now is 11:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands