rear pbr bolt kit?? 2 Attachment(s) Ok..I got a disc rear end and 10 bolt backing plates from ebmiller. Im about to get a pair or pbr disc calipers from someone on this site, but it doesnt include the mounting bolts. What do I order??....The only relative parts I can find are the rear caliper "bolts" and the rear caliper "pin boot kit"....even if these parts are correct I dont know how they mount..anyone got a pic or an exploded view?? The left are the bolts , and the right is the "pin boot kit"....any bushings needed like the front discs use or is this equivalent to the pic on the right? |
Re: rear pbr bolt kit?? I did the conversion. The following may be helpful: https://www.thirdgen.org/forums/faq-...iscs-89-a.html Your pic shows caliper parts, not mounting hardware. JamesC |
Re: rear pbr bolt kit?? Ive read that thread a hundred times and it has helped me with getting the parts I need for my disc swap. However, I just read it again and I dont see where it mentions anything about mounting hardware. I need the bolts that mount the calipers to the backing plate. |
Re: rear pbr bolt kit??
Originally Posted by rv1890
(Post 3849450)
Ive read that thread a hundred times and it has helped me with getting the parts I need for my disc swap. However, I just read it again and I dont see where it mentions anything about mounting hardware. I need the bolts that mount the calipers to the backing plate. "I used grade 8 bolts from CarQuest to mount the backing plates to the axel flanges--check the first link for appropriate sizes. Carrier to backing plate bolts are GM (P/N 10164181)." JamesC |
Re: rear pbr bolt kit?? I already have that. My backing plates are already mounted to the axle with the bolts that ebmiller sent with the backing plates. I need the mounting hardware for the caliper to the backing plate. For example the front uses 2 allen head bolts to attach the caliper to the hub. I need whatever it is for the rear |
Re: rear pbr bolt kit??
Originally Posted by rv1890
(Post 3849863)
I I need whatever it is for the rear https://www.thirdgen.org/forums/atta...s-89-shims.jpg JamesC |
Re: rear pbr bolt kit?? 1 Attachment(s) There we go...sorry about that JAmes. I think your right. I might be missing the carriers. Where can I get those and what do they look like?....So i need the carriers and the bolt kit (GM (P/N 10164181). Heres a pic of the calipers. The carriers r missing right? |
Re: rear pbr bolt kit??
Originally Posted by rv1890
(Post 3849999)
Where can I get those and what do they look like?....So i need the carriers and the bolt kit (GM (P/N 10164181). Heres a pic of the calipers. The carriers r missing right? http://www.partsamerica.com/ProductD...e=5003&PTSet=A You're missing the carrier. Yes, you need it and the bolts. By the way, the pictured calipers are missing the e-brake lever, spring, bracket--all difficult to locate individually, I'd think. If you haven't purchased yet, you might reconsider, or use them as cores. The caliper I mention above not only came with the carrier, but everything but the spring. JamesC |
Re: rear pbr bolt kit?? Thank James. Dont know if you have noticed, but u have been helping throughout this swap. You thread and info. has been very helpful. Thanks again. ......cant wait for 3.73's and 4 wheel discs! |
All times are GMT -5. The time now is 08:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands