ok 4th gen brakes I know there used but.... If I had the entire spindle, rotors, caliper, etc. could I use the entire setup or do I have to be stuck modifying my spindles. |
Re: ok 4th gen brakes I know there used but.... [QUOTE=sk8r fer life;4978304...or do I have to be stuck modifying my spindles?[/QUOTE] Yes. JamesC |
Re: ok 4th gen brakes I know there used but.... 2 Attachment(s) 4th gen spindles are not even close to working on 3rd gen cars. Here's modded 3rd gen LS spindles (powdercoated) Attachment 388709 Here's stock 4th gen LS spindles and hubs Attachment 388710 |
Re: ok 4th gen brakes I know there used but.... I see, ya I was told the spindles would work but I didn't think they would from looking at the to lt1 fbodys in my driveway but I wanted to double check Ill just modify mine. Thanks Tim |
Re: ok 4th gen brakes I know there used but.... rob you didn't cut off the lower portion of the spindles, so I'm guessing you're running both bolts through the front then? I ran mine opposite of each other, top bolt is from the front and bottom bolt is from the rear, that way the caliper won't have contact issues was my thinking. |
Re: ok 4th gen brakes I know there used but....
Originally Posted by xpndbl3
(Post 4978901)
rob you didn't cut off the lower portion of the spindles, so I'm guessing you're running both bolts through the front then? I ran mine opposite of each other, top bolt is from the front and bottom bolt is from the rear, that way the caliper won't have contact issues was my thinking. |
All times are GMT -5. The time now is 10:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands