HELP PLEASE! Brake Line Flare and Thread Size 1 Attachment(s) Ok so I am made up all the lines for Kirby's TA and now and doing the axle for my dads car. On the center rubber to brass brake hose, what type of flare and what thread is the fitting and line that I need to use? I will be making up a new hard line to run from this rubber rear center hose (off the axle) to the front of the car to the proportioning valve. Please let me know, thanks, Tim |
Re: HELP PLEASE! Brake Line Flare and Thread Size
Originally Posted by BOSTONCAMARO
(Post 5745324)
Ok so I am made up all the lines for Kirby's TA and now and doing the axle for my dads car. On the center rubber to brass brake hose, what type of flare and what thread is the fitting and line that I need to use? I will be making up a new hard line to run from this rubber rear center hose (off the axle) to the front of the car to the proportioning valve. Please let me know, thanks, Tim |
All times are GMT -5. The time now is 07:37 PM. |
© 2024 MH Sub I, LLC dba Internet Brands