|
chrome brake booster for 3rd gen By GM I know its not a go fast part.(got that covered)....just want it to look good...anybody know of any (92 Z28)Chrome bolt in brake booster..did not want to send a GM unit in to get chromed. anybody know of Any aftermarket units that are done(chrome)and /or any that fit? |
Re: LOOKING for chrome brake booster for 3rd gen I hate to be a ... male organ ... but... How about, just take your existing booster apart (or maybe even a new, or one with an otherwise known good diaphragm in it) and send the 2 housing halves off to yerbasic local shiny-thing guy? Only take acoupla minutes each way, tear-down and build-back. At least if you're slow like me, and stop for acoupla cold ones in the middle each way, and savor them lovingly. OTOH if you have enough self-control to delay that instant gratification for like 2 minutes, your drive-in to drive-out time could probably be measured in seconds instead of whole minutes. |
Re: LOOKING for chrome brake booster for 3rd gen I did look at taking one down and doing it (having it chromed) ..I might have to..as iv been looking for the better part of 4 years.. ill have to order one..and take it apart and see what I can remove.. have it done at the same time the heater box is getting done.. |
Re: LOOKING for chrome brake booster for 3rd gen
Originally Posted by sofakingdom
(Post 6264678)
I hate to be a ... male organ ... but... How about, just take your existing booster apart (or maybe even a new, or one with an otherwise known good diaphragm in it) and send the 2 housing halves off to yerbasic local shiny-thing guy? Only take acoupla minutes each way, tear-down and build-back. At least if you're slow like me, and stop for acoupla cold ones in the middle each way, and savor them lovingly. OTOH if you have enough self-control to delay that instant gratification for like 2 minutes, your drive-in to drive-out time could probably be measured in seconds instead of whole minutes. thanks for the Idea..parts ARE on the way! this way my parts can go on a shelf when I remove them from the car.. like all the other Factory parts...its just a sawp. THE place doing it sells to Rock Auto and others..and with the help from rock autos site..and 2 phone calls I have a ..factory GM rebuilt parts / AC Delco. booster..(chrome plated with polished master cylinder) keeping it simple..but nice looking.. my engs cam is to larg for eng vacuum .. but we did pick up a vac pump.. just for this... |
Re: LOOKING for chrome brake booster for 3rd gen parts came in. and are now at the platers.. also doing the A/C delete box. and having the master cylinder polished (why not).. |
Re: chrome brake booster for 3rd gen By GM almost done..just a few more chrome parts https://i.postimg.cc/tTp5gr1M/chrome.jpg a few more..as I think of things.. now just need to send it in to have them put the booster & master together.. had the master polished...whynot? |
Re: chrome brake booster for 3rd gen By GM booster is back..all set to bolt in when the bay is finished.. they set it up..then took it down (master off of booster) All I do is bolt it in..and bleed it.100% all new SS brake lines going on the car..front to back https://i.postimg.cc/HkxBR1T1/booster1.jpg and a few other parts as well https://i.postimg.cc/pXkssLbB/fti4.jpg |
Re: chrome brake booster for 3rd gen By GM the nice thing about my platers..I have Life time Guarantee on all my platting... |
Re: chrome brake booster for 3rd gen By GM |
Re: chrome brake booster for 3rd gen By GM lol its going to be bright.(name it I chromed it or its polished).clean and bright..and with over 900hp on tap..and hitting the scales at under 3200lbs with me in the car..just a nice sunbday driver. looking for the Local Dodge Demon / hellcat boys. to play with... :) steet cars can be fun.. now to just get it bolted together! https://i.postimg.cc/wB14y8rQ/fti3.jpg heated work shop!..lol looking forward to checking plugs! look at the Access.. remember anti freeze and chrome don't work well together.. start up and tune in will be with distilled water and pump lube only. all of the cooling system is aluminum with MLS head gaskets..so no rust.. drain petcocks on block and radiator.. to fill with antifreeze later on.. |
Re: chrome brake booster for 3rd gen By GM The trick to making chrome & stainless play nice with aluminum, is ZINC. That's how it's done on boats: to keep the aluminum from getting devoured electrically by the other metals, sacrificial zinc anodes are placed strategically round the boat. If you've ever had one of those "krome" water outlets to start leaking, and noticed that it had holes and divots mysteriously carved out of it that ultimately affected the sealing surface, you've experienced dissimilar-metal electrolysis. The zamac (cheeeeep chinesium-like cast zinc alloy) that the water outlet it made out of, protected the aluminum engine parts from corrosion, by sacrificing itself. You'll want to include something zinc in your cooling system... preferably something that doesn't actually do anything. Maybe you can find a way to mount a boat zinc in some one of the water pump passages or something like that. |
Re: chrome brake booster for 3rd gen By GM YES WILL HAVE ZINK IN A DRAIN PLUG. even with this set up as 100% of the coolant is in aluminum (just the T stat is SS) Electrolysis is a bad one when anti freeze is mixed right with water Distilled. you would/should never have a problem ..I say this as I had my car locked away for over 8 years with 3 year old Antifreeze in it. after it dropped a rod.. the day I pulled the eng out the inside of the cooling system still looked brand new..not a single pit or drop of rust..that was with a cast iron block.. But the big thing with chrome parts..is Antifreeze DESTROYS the finish. If you get a leak (almost always when a eng is new) ya might get a leak from a hose..or a new part Failing ..that's why the start up with just the water with all the chrome on my car..it would suck!! to get all the stuff re chromed. It looks frosted when left on chrome for a few hrs.. (had a 1967 ford Fairlane GTA) 390 big block.. and did the same chrome monster.. the solder let go on the radiator.. and sprayed the eng... it did not end well..for the chrome parts...lucky for me I had a Buddy who had a chrome shop.. and paid to redo the stuff..dont want to do it a 2nd time.. |
Re: chrome brake booster for 3rd gen By GM Oh damn baller status lol never thought to chrome those parts nice |
Re: chrome brake booster for 3rd gen By GM Do you have any parts that are spray chromed? I have a crankshaft pulley that I'm welding a toothed wheel to and will probably have spray chromed. I've seen lots of opinions (no long term reviews) that speak wonders of the professional spray chrome applications. |
Re: chrome brake booster for 3rd gen By GM
Originally Posted by Tibo
(Post 6286817)
Do you have any parts that are spray chromed? I have a crankshaft pulley that I'm welding a toothed wheel to and will probably have spray chromed. I've seen lots of opinions (no long term reviews) that speak wonders of the professional spray chrome applications. have checked into having the plastic filler panel spray chromed..the place I called wanted $300 to do it...lol I came make one out of aluminum and have it polished for less.. https://i.postimg.cc/LX2wSsC7/20170810-181321.jpg https://i.postimg.cc/FRNc0dCp/20170814-164622.jpg https://i.postimg.cc/TwGTxvn2/20170830-183759.jpg you started this one...this shot shows it finished. still thinking of counter sinking the holes (cutting them) https://i.postimg.cc/gJmdZDmy/20170912-182928.jpg https://i.postimg.cc/k4q6gKHz/20170912-183014.jpg https://i.postimg.cc/rmxcPJcZ/streering.jpg https://i.postimg.cc/tTp5gr1M/chrome.jpg there's still a few smaller parts going to be done.. but the plating is almost finished... |
Re: chrome brake booster for 3rd gen By GM
Originally Posted by articwhiteZ
(Post 6286904)
have seen it...but no. I still have the old school step of parts getting polished then the Nickle..copper..chrome plating process.. have checked into having the plastic filler panel spray chromed..the place I called wanted $300 to do it...lol I came make one out of aluminum and have it polished for less.. What was the name or website of the place that has been doing your chroming? The place I might go to is wanting $150 to do my pulley/toothed wheel piece and it seems a bit much. PS. My old filler panel looks gorgeous there |
Re: chrome brake booster for 3rd gen By GM I'm interested as well as these pics are awesome. Would love to get some items chromed. |
Re: chrome brake booster for 3rd gen By GM this shot of chrome parts.. hood latch/spring/z bar..heater box...brake boosteGr..and polishing the master cylinder.. total out the door $650. I take parts in in batches.. they are a 30 min drive from me one way.. https://i.postimg.cc/tTp5gr1M/chrome.jpg not cheap..but ya do get a life time guarantee/warranty. on the chrome... |
Re: chrome brake booster for 3rd gen By GM Parts look really good. Where did you get that radiator shroud cover panel? I assume you made it? Was hoping there was some secret shop out there selling ones that magically fit 3rd gens. |
Re: chrome brake booster for 3rd gen By GM
Originally Posted by ShiftyCapone
(Post 6287832)
Parts look really good. Where did you get that radiator shroud cover panel? I assume you made it? Was hoping there was some secret shop out there selling ones that magically fit 3rd gens. https://i.postimg.cc/cHd1xTKn/imag17...fb9d10d49c.jpg was not a bad start.. just needed to have the welds worked out and a good buffing.. came out nice looking..at this point..I can have it remade/copied as a 1 piece unit. https://i.postimg.cc/gJmdZDmy/20170912-182928.jpg |
Re: chrome brake booster for 3rd gen By GM your name change should be ArticChromeZ now lol that clean up nice |
Re: chrome brake booster for 3rd gen By GM
Originally Posted by Zach/90\irocZ
(Post 6287924)
your name change should be ArticChromeZ now lol that clean up nice I came real close to having my aluminum block polished..... was even going to do the A arms and K member.....who knows...If I get bored . its so easy to just drop things off..and say..go ahead and plate this..if all the welding was done...it would be nexed Fat Elvis...could get the Nick name Of Chromaro https://i.postimg.cc/Y9kTsTMM/20160613-211011.jpg |
Re: chrome brake booster for 3rd gen By GM Spokane Metal Finish (polishing and chrome platting) Ca Power Brake supply GM Brake parts (parts came to me looking Brand New) info from Rock auto is who gave me the heads up.. side note: when I got the brake parts back from CA. put back together.. you will want to get a new master Cylinder (plastic thing the brake fluid is in)..lol they tend to use.. used ones and will show marks/scratches/ age..I Picked up a brand New unit with top from Rock Auto..to show as Brand new. |
Re: chrome brake booster for 3rd gen By GM UPDATE: for others who have not seen the pics of whats on it's way.. https://cimg8.ibsrv.net/gimg/www.thi...d90a352efc.jpg https://cimg1.ibsrv.net/gimg/www.thi...98649d1e6d.jpg |
| All times are GMT -5. The time now is 07:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands