Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Cooling (https://www.thirdgen.org/forums/cooling/)
-   -   Proform or other Electric water pump instaled picture (https://www.thirdgen.org/forums/cooling/407078-proform-other-electric-water.html)

smoktire 02-04-2007 12:27 AM

Proform or other Electric water pump instaled picture
 
Plz post a pic of your electric water pump .Do it work good for the street :confused:

Gramps 02-05-2007 12:26 PM

altho i havent installed my electric water pump...i can tell you that itll be just fine for daily driving. i think the proforms flow 33gpm. i bought a CSR and a march pulley kit for my alternator and power steering pump. if you go electric you have to adapt your accessories because the stock brackets work off of the mechanical water pump. proform is a pretty good setup, i think theres even a proform kit that they sell on JEGS.com. only think i can tell you is to avoid March Performance as best you can, they are a terrible company.

smoktire 02-05-2007 10:49 PM

I got a s-10 manual stering box and i moved the alternator to the left lower side but i need to make a kind of belt ajustment....

Gramps 02-06-2007 12:36 PM

well if you dont have p/s...youll only need the brackets for the alternator. march only sells alternator brackets for the passenger only. so if you wanna go with march performance, youll have to move the alternator back to the passenger side. im not sure who else makes bracket kits for electric water pumps, but im sure one of em makes something for the drivers side.

would it be much work to put the alternator back on the right where it belongs?

smoktire 02-07-2007 11:07 PM

Just made a home made braket so for thoses who whant to see it here is the pic...

http://img247.imageshack.us/img247/2415/imm368nd2.jpg

Gramps 02-08-2007 11:48 AM

awesome setup. howd you wire the water pump up to run?

PS: nice antifreeze ;)

rtkjadams 02-09-2007 07:59 AM

3 Attachment(s)
Here is a couple pictures of my setup, I removed the charge pipe so you can see the electric water pump.

smoktire 02-09-2007 09:03 AM

Nice setup rtkjadams :eek: How it run on the 1/4 ? ....I put it on the key switch with a separate switch for manual overridind.Work verry good .I let the temp raise to 195 then shut the engine start the water pump & fan it go back to 150 in about 2 min so it will be fantastic at the track :nod:

rtkjadams 02-09-2007 10:24 AM

I'm still tuning it, haven't run it at the track yet!


All times are GMT -5. The time now is 11:45 AM.


© 2024 MH Sub I, LLC dba Internet Brands