3 core radiator upper support I see them on all kinds of custom car build... but I cant find nay to buy. Suggestions? |
Re: 3 core radiator upper support I made one for an aftermarket 4 core years ago. Was pretty easy with a small welder, metal saw, and a can of duplicolor truck bed liner. Used steel from Lowe's. Took it off years ago to go a different route and built a new one for the original radiator that I reinstalled after discovering the 4 core didn't make a bit of difference. here is a pic of the 4 core https://cimg1.ibsrv.net/gimg/www.thi...226875e0d7.jpg |
Re: 3 core radiator upper support |
Re: 3 core radiator upper support
Originally Posted by articwhiteZ
(Post 6288409)
GD |
Re: 3 core radiator upper support
Originally Posted by GeneralDisorder
(Post 6289177)
Got a part number or manufacturer for that? I'm interested..... GD https://i.postimg.cc/cHd1xTKn/imag17...fb9d10d49c.jpg I have 2 aluminum Rads one is a 2 core. wIth 20AN fittings. and a 4 core..for reg hoses..if I cant use it..I will hit ya up.. https://i.postimg.cc/NFCWf1GF/rad1.jpg https://i.postimg.cc/jq8VXr6T/rad2.jpg ya never know how things work out...the 4 core will also be up for sale (new in box)as seen above in post.. note 4 core is set up with AN or reg hose for over flow.(at cap) and the silly temp bung is capped off with 1/8 npt..if ya don't need it.if ya need it ya just remove Plug.. https://i.postimg.cc/0N1hQ5vY/rad5.jpg so many unused parts... |
Re: 3 core radiator upper support https://cimg4.ibsrv.net/gimg/www.thi...9300d5af7d.jpg https://cimg5.ibsrv.net/gimg/www.thi...404439c19d.jpg https://cimg6.ibsrv.net/gimg/www.thi...dc1cbe4433.jpg https://cimg7.ibsrv.net/gimg/www.thi...31e05ed911.jpg I ordered a champion 3 core with the twin elec fan setup then just made a plate out of aluminum. I used body clips on the radiator after drilling 4 holes in the upper mount. |
Re: 3 core radiator upper support
Originally Posted by Best47
(Post 6289378)
https://cimg4.ibsrv.net/gimg/www.thi...9300d5af7d.jpg https://cimg5.ibsrv.net/gimg/www.thi...404439c19d.jpg https://cimg6.ibsrv.net/gimg/www.thi...dc1cbe4433.jpg https://cimg7.ibsrv.net/gimg/www.thi...31e05ed911.jpg I ordered a champion 3 core with the twin elec fan setup then just made a plate out of aluminum. I used body clips on the radiator after drilling 4 holes in the upper mount. |
All times are GMT -5. The time now is 09:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands