Third Generation F-Body Message Boards - Aftermarket ECU options

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- DFI and ECM (https://www.thirdgen.org/forums/dfi-ecm/)

- - Aftermarket ECU options (https://www.thirdgen.org/forums/dfi-ecm/761648-aftermarket-ecu-options.html)

Aftermarket ECU options

I have a 90-92 7730 speed ensity system and would like to run an aftermarket ecu for better data logging and tune on the fly. Any sugestions on a good system would be most helpful

Re: Aftermarket ECU options

Quote:

Originally Posted by Dazza Wilton (Post 6304491)

I have a 90-92 7730 speed ensity system and would like to run an aftermarket ecu for better data logging and tune on the fly. Any sugestions on a good system would be most helpful

I use Megasquirt. You can download a demo version of Tunerstudio and play with it to get an idea of the interface.

http://www.tunerstudio.com/index.php/tuner-studio

I used the Microsquirt module which I installed in a factory ECM case:

http://members.cisdi.com/~anesthes/projects/megasquirt/

Originally I ran it with a distributor, but I've since upgraded to distributorless ignition using EDIS coils and a 36 tooth trigger wheel.

-- Joe

Re: Aftermarket ECU options

I'm using a Holley HP ecu with the terminator throttle body. I'm not sure if its a cost effective approach but I like the capabilities it has. I would also look into the megasquirt ECU as the other poster stated.