Third Generation F-Body Message Boards - Aftermarket Eprom Question

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- DIY PROM (https://www.thirdgen.org/forums/diy-prom/)

- - Aftermarket Eprom Question (https://www.thirdgen.org/forums/diy-prom/610170-aftermarket-eprom-question.html)

Injected61

04-07-2011 05:32 PM

Aftermarket Eprom Question

I bought 2 aftermarket chips for a 350 SD. TPI, AUJP- from 2 different well known TPI companies. What I would like to know is there a way to tell if the
Eprom they sent was orginally from a 350 TPI SD?? The 2 Eproms are very
different from each other. One even has a (what looks like a resistor) soldered to one of the small chips?

JP86SS

04-07-2011 05:58 PM

Re: Aftermarket Eprom Question

Might be able to figure it out using some of the info in this thread.
https://www.thirdgen.org/forums/diy-...49-memcal.html

Saar	04-07-2011 10:53 PM

Re: Aftermarket Eprom Question

sounds like one of the MEMCALs was meant for something other than a V8...

All times are GMT -5. The time now is 05:08 PM.