MSD ignition 6al question
 

i just installed a msd 6al box into my car. the car runs fine so far, but it sounnds like the Accel dist is making alot of noise after the install. its just a faint high freq sound, almost sounds like you can hear the rotor and cap arc now. anyone heard of this? i pulled the cap off and checked the inside and all is normal. when i listen to the engine up close its coming from the dis for sure. thanks!

ttt

Thats interesting!

I personally would not put any accell product in my car. I've just had crappy experience with thier plugs, ingition module and wires. I have the Crane Hi6S ignition and BW cap and rotor. No noise whatsoever. I would check your pickup coil and ignition module for noise. If that does not work i'd replace the cap and rotor with something other than accell.!

:)

thanks!

Your ringing reminds me of a ringing I got when I installed a Crane Hi6 in my 3G...I had the wiring wrong between AB connection at the ignition module ended up with 12vdc on both, engine ran plus ringing. I ended up with a bad ignition module. I replaced module corrected the wire...all is well, no ringing. Not sure if this helps but its worth a thought.