Third Generation F-Body Message Boards - I need the VATS programmed out...

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- Electronics (https://www.thirdgen.org/forums/electronics/)

- - I need the VATS programmed out... (https://www.thirdgen.org/forums/electronics/414217-i-need-vats-programmed.html)

RAGEman

03-20-2007 11:17 PM

I need the VATS programmed out...

I have a 94 LT1 in my Camaro, and I have used the Baker Electronice VATS bypass module to correct the VATS problem, and Im not positive that it is working. I don't know that it isnt, but the car starts and sputters and then dies, so I figured what the heck, I might as well program it out of the computer and see if that fixes my car problems. Who did you get to do yours? How much does this cost?

Brads RS

03-21-2007 10:19 AM

Re: I need the VATS programmed out...

Larrys electric 618-282-2852 can program it out along with any other changes you want except custom tuning. Its normally $100 dollars to reprogram the pcm. check out the web site. www.larryselectricsite.com

bahsarie

03-21-2007 10:46 AM

Re: I need the VATS programmed out...

there is a guy ebay that sells a box that gets rid of the vats by sending the signal that the vats box does to the ecm. ebay vats bypass. should be about 30 bucks total

All times are GMT -5. The time now is 05:32 AM.