HID reverse light on my ThirdGen 3 Attachment(s) At night I cant see to back up at all. To make matter worse, day or night it was as if people didn't know I was backing out and they would zoom past me. Pretty dangerous. I picked up this HID kit for 39.95 from a local stereo shop. Its 35w and even fully warmed up it is still cooler than the incandescent's. I was a very easy swap, the included grommets fit perfectly in the hole. Attachment 240554 This is how I wired it up, real simple and the ballast fit nicely in the area next to the reverse lights. I did have to cut just a little to get them to slip in. Attachment 240555 BEFORE Attachment 240556 |
Re: HID reverse light on my ThirdGen 3 Attachment(s) |
Re: HID reverse light on my ThirdGen wouldnt that melt your housing after excessive use? |
Re: HID reverse light on my ThirdGen I haven't had it in long, but after install I left it in reverse for like 10 minutes and it was still cool to the touch. These bulbs are very cool when compared to incandescent bulbs. |
Re: HID reverse light on my ThirdGen H.I.D. "capsules" run much much cooler than conventional bulbs. |
Re: HID reverse light on my ThirdGen what bulbs did you use..... |
Re: HID reverse light on my ThirdGen wow, thats bright |
Re: HID reverse light on my ThirdGen the bulbs are just generic 6000k that came with the kit. |
Re: HID reverse light on my ThirdGen
Originally Posted by Bradlyj8Z28
(Post 5283385)
the bulbs are just generic 6000k that came with the kit. |
Re: HID reverse light on my ThirdGen Are all HID capsules or just the ones in these cheap hid kits? |
Re: HID reverse light on my ThirdGen They're all capsules. It doesn't matter if you bought them on ebay, or they came as OE on an M6. |
Re: HID reverse light on my ThirdGen
Originally Posted by Bradlyj8Z28
(Post 5279392)
.....This is how I wired it up, real simple and the ballast fit nicely in the area next to the reverse lights. I did have to cut just a little to get them to slip in. https://www.thirdgen.org/forums/atta...5-18small2.jpg..... |
Re: HID reverse light on my ThirdGen The black part going into the housing is a grommet included in the kit. It actually fit perfectly. |
All times are GMT -5. The time now is 08:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands