|
Battery cable trouble The ends on my battery cables are pretty gnarly so I wanted to cut them back and splice them, but can I safely (and legally) do that? Or is there a way to just replace the whole battery cable without a harness swap? |
Re: Battery cable trouble
Originally Posted by Trevmust
(Post 5285095)
Or is there a way to just replace the whole battery cable without a harness swap? http://www.ebay.com/itm/DEKA-00300-B...2dcfd8&vxp=mtr |
Re: Battery cable trouble its a top post. |
Re: Battery cable trouble
Originally Posted by Trevmust
(Post 5285428)
its a top post. Could prob walk into your local parts shop and get generic cables straight off the shelf Only have to be long enough Batt - starter/ block ,nothing special about them |
Re: Battery cable trouble The negative cable is easier to do; it's right on top. The positive is a bit trickier only because of tight quarters (I have an 8 cyl. TPI) but if you have a jack & stands, it will be easier. Figure about a half hour for removal and re-install of both. I bought Duralast Gold 2 gauge at Autozone for about 13 bucks each. If that's too much, they have less expensive options. |
Re: Battery cable trouble Thanks for the advice guys |
| All times are GMT -5. The time now is 06:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands