Third Generation F-Body Message Boards - Digital instrument cluster

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- Electronics (https://www.thirdgen.org/forums/electronics/)

- - Digital instrument cluster (https://www.thirdgen.org/forums/electronics/711303-digital-instrument-cluster.html)

bryan623

11-14-2014 09:06 AM

Digital instrument cluster

Hey I see a Digital instrument cluster was offered in a 88-87 GTA trans am... My question is will it work with a 89 GTA? Also is there any re wiring I need to do?

John in RI

11-14-2014 12:32 PM

Re: Digital instrument cluster

The ENTIRE car would need to be re-wired with the proper harnesses for the conversion to work properly. Engine harness, Dash Harness, Body Harness, Tail light harness,....ect.

:driving:

Firechicken86

11-18-2014 01:31 AM

Re: Digital instrument cluster

I did the swap into my 89 GTA. If you're interested in doing it, look at my thread to see what's involved.

eseibel67

11-18-2014 02:09 AM

Re: Digital instrument cluster

Quote:

Originally Posted by John in RI (Post 5842395)

The ENTIRE car would need to be re-wired with the proper harnesses for the conversion to work properly. Engine harness, Dash Harness, Body Harness, Tail light harness,....ect.

:driving:

On top of all this, the actual dash itself is specific to digital dash, you can't retrofit to an analog. It's quite an undertaking, even if you have every piece off of a complete donor car right beside you.

bryan623

11-18-2014 02:14 AM

Re: Digital instrument cluster

You mean the bezel right? Yeah, I figured by looking at it the dash was different. But I swapped a digital instrument cluster into my Ford Taurus SHO and that wasn't too bad. Also the one that did it before could you post a link to your post?

eseibel67

11-21-2014 09:57 PM

Re: Digital instrument cluster

Not just the bezels, THE ENTIRE DASH case is specific to digital dash.

All times are GMT -5. The time now is 05:28 PM.