![]() |
Big or heavy 3rd gen parts for sale in Atlanta I have some parts I want to sell that are to big or heavy to ship so anyone around the Atlanta area or is traveling to Atlanta that needs some of these parts let me know. A 350 tpi long block from a 92 TA with 125K was running good when removed but now from sitting so long it is locked up, I'm opening it up to see what the problem is and will post what I find. 88 TA(cable speedo)700R4 with 120K shifted great with converter $150.00 . 91 Z28 700R4 rebuilt about 20k ago and vette servo shifted great with converter $200.00. 3" custom true dual exhaust for headers that goes under the rear end with crossover, 2 flowmaster mufflers and chrome tips from a 91 Z28 350 TPI A/T $150.00. |
Hey, I'm near the Commerce, Athens area and am VERY interested in the rear end. Do you know if my disk brakes will swap over easily? feel free to email adamwilliams1@alltel.net Thanks |
More info on the heads. I'm down in Warner Robins. Intake/exhaust runner size, cc chambers, springs, etc. |
Trick flow heads are sold. |
How much for the long block and stall? |
$200.00 for either long block. I was told by the previous owner of this Z28 that it was a 2600 or 2800 stall converter, he could not remember which one it was. It looks like new. I would take $75.00 for it. I don't know much about IDing stall converters. Can anyone help with converter IDing? |
Serpentine setup is sold. |
any pictures of that exhaust? |
I will get some pictures of the exhaust ASAP. Thx. |
Yeah, I'm in the Dacula area. Interested in the exhaust. How bad is the ground clearance/scraping the pavement? |
2 Attachment(s) These came from 91 Z28 that was wrecked. The car had 1.25" drop springs and there is some scrapping between the cross over and were they mount to the headers. I never was able to drive it, I bought it as a parts car. Here are the pics I promised. They are dirty but will clean up nicely. |
1 Attachment(s) I do have the SLP headers that these pipes were hooked to also. They are 1 5/8" primary tubes with no air tubes. Will sell all together for $450.00 Pickup only. The headers are up for auction on Ebay and ends this Sunday 12/03/06 at 8:30 pm. Will stop the header auction if someone shows up to buy it all by the end of the auction. |
Racing seats pics 1 Attachment(s) Trannies and engines I will give a 30 day money back guarantee. |
TTT |
seats how much for seats. |
Make me an offer and we will go from there. Figure a min. of $50.00 for shipping to Mo. Thx |
SLP headers sold |
Click the link for the seats: https://www.thirdgen.org/forums/inte...om-racing.html |
Originally Posted by Dokken10
(Post 3148098)
Click the link for the seats: https://www.thirdgen.org/forums/inte...om-racing.html |
No rips, cuts or damage anywhere. Thx. |
have you aftermarket torque arm or aftermarket rear lower control arms? |
Sold those about 3 weeks ago. Those aren't to heavy or big to ship. |
TTT |
Sale of the exhaust pipes, mufflers and tips is pending. |
Got any pictures of the long blocks? How complete are they? They do have the TPI intakes on them I asume? Any accesories on the front? Best price if I drive up and take both??? |
Originally Posted by 97ramsst
(Post 3149846)
Got any pictures of the long blocks? How complete are they? They do have the TPI intakes on them I asume? Any accesories on the front? Best price if I drive up and take both??? |
where are you in ATL i will give you $100 and pick up that 305TPI longblock, lmk? |
Ok, $100.00 for the longblock and $100.00 for directions. $100.00 I'll just keep it and use the heads on a 350. |
Originally Posted by Dokken10
(Post 3150771)
Ok, $100.00 for the longblock and $100.00 for directions. $100.00 I'll just keep it and use the heads on a 350. |
I made a counter-offer, $200.00 firm. Block,crank,rods,pistons,cam,lifters,oil pump,oil pan,timing chain,timing chain cover,harmonic balancer,flywheel,heads,valves,valve springs,rockers,pushrods,spark plugs,valve covers and all block and head mounted sensors. I got this engine from a friend and I know it ran strong with no problems. He is installing a 383 so he didn't need this engine. I do give a 30 day money back guarantee on the mechanical parts I sell. ---------- EVERYONE please read post #26 for definitions of Short block, Long block and Complete engine before you ask me what comes with these engines. THX. |
Is there a phone number i can reach you at? I have some questions about the two 700r4s you have for sale. Thanks |
Originally Posted by ZAKS62
(Post 3151011)
Is there a phone number i can reach you at? I have some questions about the two 700r4s you have for sale. Thanks |
Originally Posted by Dokken10
(Post 3150921)
I made a counter-offer, $200.00 firm. Block,crank,rods,pistons,cam,lifters,oil pump,oil pan,timing chain,timing chain cover,harmonic balancer,flywheel,heads,valves,valve springs,rockers,pushrods,spark plugs,valve covers and all block and head mounted sensors. I got this engine from a friend and I know it ran strong with no problems. He is installing a 383 so he didn't need this engine. I do give a 30 day money back guarantee on the mechanical parts I sell. ---------- EVERYONE please read post #26 for definitions of Short block, Long block and Complete engine before you ask me what comes with these engines. THX. |
Originally Posted by maroon88iroc
(Post 3151146)
nvm then i thought it came with the intake, not interested. |
Originally Posted by Dokken10
(Post 3151188)
Maroon88iroc: please stop asking about anything I have for sale, you seem to be all talk. You should try the websites were people give things away free. You offered me $100.00 for a longblock(even a 305) with 88k and the TPI intake????????????? Please take your low balling self elsewhere!! I don't mind negotiating on a price, your offers now and in the past are an insult. |
Deleted. |
Casey, $200.00 is a good deal. I won't take any less. I think its sold anyways. |
put me in line if not sold |
It's still for sale. No one has comitted 100%. If you want it let know and pay me ASAP and its yours. |
my 2 sons live in Alt.i am going down in a few weeks i will take it you can email me at r_martin85@yahoo.com |
Deleted. |
It's down to who pays first. |
is the 350 still for sell ? if so can i get the cast #'s ? and i live north of ATL. i go down all the time , and im in the military but ill be home in a couple weeks so if u could hit me back id preshat it . |
devilwater you have a PM. |
305 is sold. |
do you still have 350 long blocks for sale. im interested. and im in jacksonvile. im also willing to drive to pickup. |
Sale of the 2 TPI 350 roller longblocks and 1 shortblock is pending pickup and payment of $600.00. |
Due to 95% of the people on here talk the talk but don't walk the walk, I'm going to sell these parts as 1st to pay me gets them. The pending sale looks good but again with my experience off this site it could fall thru. |
Deleted. |
Deleted. |
All times are GMT -5. The time now is 11:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands