|
parting 2-1988 gtas in connecticut I have 2-1988 gtas that I am parting out..I bought one to fix and the other for parts but looks like it needs to much work ...anyway both are 350tpi,autos...3:27 disc posi ...tan interiors on both..digital dash..etc..local pick up on larg items.. |
Re: parting 2-1988 gtas in connecticut How much for one of the engines, only need longblock, you can keep TPI setup. Also, how much for one of the rears? Where in CT are you located? |
Re: parting 2-1988 gtas in connecticut Do either have a steering wheel controlled radio, that's in good condition and fully working? |
Re: parting 2-1988 gtas in connecticut looking for a digital dash cluster ..what is the mileage on dash..thanks |
Re: parting 2-1988 gtas in connecticut do you have a good drivers side cupholder? if so how much shipped to 41102? |
Re: parting 2-1988 gtas in connecticut Looking for a complete TPI setup. wiring harness, intakes, fuel rails and all the sensors and such. Let me know what your asking and also if you can get me a shipping quote to 43212 |
Re: parting 2-1988 gtas in connecticut either of the dashpads good? |
Re: parting 2-1988 gtas in connecticut I'm looking for the steering column that goes from the firewall to the steering box in the engine bay. If the boot is good on the upper joint I'm interested. Please email me at austingerding@hotmail.com if you have it. Thanks |
Re: parting 2-1988 gtas in connecticut
Originally Posted by Gen 3 Fbody Fan
(Post 3441896)
Do either have a steering wheel controlled radio, that's in good condition and fully working? ----------
Originally Posted by vingta1989
(Post 3441911)
looking for a digital dash cluster ..what is the mileage on dash..thanks ----------
Originally Posted by slayer2000
(Post 3442383)
do you have a good drivers side cupholder? if so how much shipped to 41102? |
Re: parting 2-1988 gtas in connecticut
Originally Posted by superchevy72
(Post 3442443)
Looking for a complete TPI setup. wiring harness, intakes, fuel rails and all the sensors and such. Let me know what your asking and also if you can get me a shipping quote to 43212 ----------
Originally Posted by Tmic87TPI
(Post 3442448)
either of the dashpads good? |
Re: parting 2-1988 gtas in connecticut do the headlights work (go up and down?) |
Re: parting 2-1988 gtas in connecticut 1 Attachment(s) i need an intake elbow from a firebird with TPI and MAF. i have attached a picture, the rubber piece from the throttle body to the MAF sensor i need a price shipped to 07649 thanks |
Re: parting 2-1988 gtas in connecticut
Originally Posted by maroman88
(Post 3443230)
i need an intake elbow from a firebird with TPI and MAF. i have attached a picture, the rubber piece from the throttle body to the MAF sensor i need a price shipped to 07649 thanks ----------
Originally Posted by avengersteve
(Post 3442918)
do the headlights work (go up and down?) |
Re: parting 2-1988 gtas in connecticut how much for one dash pad? I also will pick it up so no shipping. |
Re: parting 2-1988 gtas in connecticut pm sent on intake elbow |
Re: parting 2-1988 gtas in connecticut
Originally Posted by tpi-hearse
(Post 3439923)
I have 2-1988 gtas that I am parting out..I bought one to fix and the other for parts but looks like it needs to much work ...anyway both are 350tpi,autos...3:27 disc posi ...tan interiors on both..digital dash..etc..local pick up on larg items.. |
Re: parting 2-1988 gtas in connecticut
Originally Posted by Tmic87TPI
(Post 3443316)
how much for one dash pad? I also will pick it up so no shipping. ----------
Originally Posted by 86roc2luv
(Post 3443532)
do you by chance still have a set of runners off one of these motors. I need the drivers side runner if your willing to seperate, if not what do you want for the set? Thanks. |
Re: parting 2-1988 gtas in connecticut
Originally Posted by tpi-hearse
(Post 3443545)
$100 for a nice one $50 for a fair one ---------- |
Re: parting 2-1988 gtas in connecticut
Originally Posted by Tmic87TPI
(Post 3443586)
alright, where in ct are you located, and what qualifies as fair condition? faded paint or small cracks? and is that dash pad on ebay yours (buy it now 49.99)? |
Re: parting 2-1988 gtas in connecticut tpi-hearse- can you pm me your address, Id like to come look at the dash pads. |
Re: parting 2-1988 gtas in connecticut how about the seats cloth or leather? |
Re: parting 2-1988 gtas in connecticut
Originally Posted by 89N10GTA
(Post 3443961)
how about the seats cloth or leather? |
Re: parting 2-1988 gtas in connecticut can i have pic of seats,and price please gtafanatic88@hotmail.com thanks |
Re: parting 2-1988 gtas in connecticut got my part already! great seller |
Re: parting 2-1988 gtas in connecticut 1 Attachment(s)
Originally Posted by GTAfanatic
(Post 3444289)
can i have pic of seats,and price please gtafanatic88@hotmail.com thanks |
Re: parting 2-1988 gtas in connecticut im looking for a positive battery side wiring harness for a 350.. im not sure how specific year it has to be but im looking for a 91... its just the positive side(the short piece) from battery to the starter coil and it has a connector that will fit this connector right next to the battery with an inline fuse i believe. http://i6.photobucket.com/albums/y21.../connector.jpg also looking for the tpi air intake setup that mounts where the hood latches. |
Re: parting 2-1988 gtas in connecticut Looking for a Complete fuel tank with sending unit in good shape. Where are you located in CT. |
Re: parting 2-1988 gtas in connecticut How much for a console cover/armrest? Shipped to 37066. Needs to be in good condition. |
Re: parting 2-1988 gtas in connecticut 1 engine sold... |
Re: parting 2-1988 gtas in connecticut Are any of these a hard top? I need the headliner board and clips. I can pick up if you have it. |
Re: parting 2-1988 gtas in connecticut
Originally Posted by Dave88z
(Post 3474861)
Are any of these a hard top? I need the headliner board and clips. I can pick up if you have it. |
Re: parting 2-1988 gtas in connecticut PM sent. |
Re: parting 2-1988 gtas in connecticut Are the parts still available, I would like to pick up a headliner board and sunvisors too. |
Re: parting 2-1988 gtas in connecticut left and right front spindles to 21040? |
Re: parting 2-1988 gtas in connecticut Do you still have the rear ends and if so would you consider selling just the carrier and gears, i know the shipping on the whole rear would be way to much for me to spend . |
Re: parting 2-1988 gtas in connecticut Still got any 3.27 Posi Rears? I need a new rear end, mine is on the way out. How much you want for one? |
Re: parting 2-1988 gtas in connecticut do you have the dual cats? shippingto 95624 |
Re: parting 2-1988 gtas in connecticut I don't think this guy is going to respond. |
Re: parting 2-1988 gtas in connecticut
Originally Posted by lane362
(Post 3485044)
Do you still have the rear ends and if so would you consider selling just the carrier and gears, i know the shipping on the whole rear would be way to much for me to spend . ----------
Originally Posted by 83Formula
(Post 3488725)
do you have the dual cats? shippingto 95624 |
Re: parting 2-1988 gtas in connecticut Can I pick up a headliner board or do you ship only? |
Re: parting 2-1988 gtas in connecticut How much for a set of GTA tail lights in good condition? Shipped to 95973. Also, can you send pics to nitrokid@energyguru.com |
Re: parting 2-1988 gtas in connecticut how much for gears and rotors/calipers shipped to west PA? needa get the old POS drums off my iroc |
Re: parting 2-1988 gtas in connecticut How much to ship a whole driver's side headlight assembly to 85701 Tucson, Az???? |
Re: parting 2-1988 gtas in connecticut
Originally Posted by Dave88z
(Post 3489475)
Can I pick up a headliner board or do you ship only? ----------
Originally Posted by Bullydawg
(Post 3489503)
How much for a set of GTA tail lights in good condition? Shipped to 95973. Also, can you send pics to nitrokid@energyguru.com ----------
Originally Posted by The_Phoenix
(Post 3489809)
How much to ship a whole driver's side headlight assembly to 85701 Tucson, Az???? ----------
Originally Posted by LMSkyliner
(Post 3489586)
how much for gears and rotors/calipers shipped to west PA? needa get the old POS drums off my iroc |
Re: parting 2-1988 gtas in connecticut wasn't aware of that. my fault. would the rotors/calipers still fit? |
Re: parting 2-1988 gtas in connecticut PM sent regarding parts for seats. |
Re: parting 2-1988 gtas in connecticut You have them on your ebay for $50... Anyway, do you have any single lined Irocs, or 2 front formula rims, or 16X8 Black crosslace wheels, or a 91-92 formula nose? |
Re: parting 2-1988 gtas in connecticut
Originally Posted by Bullydawg
(Post 3490829)
You have them on your ebay for $50... Anyway, do you have any single lined Irocs, or 2 front formula rims, or 16X8 Black crosslace wheels, or a 91-92 formula nose? yes I have all of that..but will not ship the nose |
Re: parting 2-1988 gtas in connecticut How much for the wheels?Could I please get a price no all of them? |
Re: parting 2-1988 gtas in connecticut [QUOTE=tpi-hearse;3490158]yes pick up on the headliner...I pmed you my # ---------- Never got the pm, but still interested. |
| All times are GMT -5. The time now is 07:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands