F/S 416 Heads, mini starter, XE268H cam, 2101 Intake, Distributor, +More
 

All right guys I've committed to my LS1 swap in my FB so it is time to let lose some of my parts.
I will do paypal but 3% fee applies for the smaller things. Anyone may PM me or drop me a line at jnreilly@sbcglobal.net.

Let me know guys, all work with ya :D

JR
-----------------------------------------------------------------------
416 heads with 3 angle valve job and gasket matched.
mild down a little for some more compression.
Exhaust port valves changed with stock size Manly valves.
Also heads now have bolt in APR rocker arm studs
Done by a reputable shop that races their cars in all the
competitions down here.
Comes with shop's brand of Springs and retainers good for .500 lift
maybe .550 lift I'm not sure. I was running .477''/.480'' without a problem.
2000miles since wprk. - $400 shipped

Re: F/S 416 Heads, mini starter, XE268H cam, 2101 Intake, Distributor, +More
 

Comp Cam Xtreme Energy XE268H Hydraulic Flat Tappet Camshaft
Lift: .477''/.480'' Duration: 268°/280° RPM Range: 1600-5800
Makes a 305 sound GOOD! Lifters included and were kept in order.
750 miles on parts. - $110 shipped

Re: F/S 416 Heads, mini starter, XE268H cam, 2101 Intake, Distributor, +More
 

sbc/lt1 mini starter in exelent shape $55 shipped

Flowmaster y pipe two 2.5" inlets 3" outlet - $23 shipped

2101 Ebelbrock Intake with new polished coolant neck. - $65 shipped

Re: F/S 416 Heads, mini starter, XE268H cam, 2101 Intake, Distributor, +More
 

Mallory Unilite distributor with wires and spark plugs and accel coil.
Set-up worked and works great.
- $145 shipped

Re: F/S 416 Heads, mini starter, XE268H cam, 2101 Intake, Distributor, +More
 

(above picture) Edelbrock hard fuel rail with Jegs fuel filter and stainless line to mechanical fuel pump. - $40 shipped

Perma-Cool Hi-Performance Stainless Steel Flex Fan 15". - $25 shipped

Granny's plastic mech fan - $15 shipped

Used Mr. Gasket Street Scoop 2.
The aluminum intake mount has been shaved down 1"
to make it closer to the hood. - $150 shipped
Width: Front - 12-3/4'', Back - 7''
Overall Length: 14-1/2''
Fits: 5-1/8'' Necks

Re: F/S 416 Heads, mini starter, XE268H cam, 2101 Intake, Distributor, +More
 

A/C delete Pulley - 45 shipped

I have one 180 stat and one 160 state both Milodon High-Flow Thermostats both slightly used. - $12 shipped each

1405 Edelbrock Carb that need service, never got it working 100% right
Even after rebuilding it myself. But it could very well be my inexperience with crabs. comes with jet vacuum springs. - $55 shipped

that's it for engine stuff,:thanks: for looking.

Re: F/S 416 Heads, mini starter, XE268H cam, 2101 Intake, Distributor, +More
 

bump for today.

Re: F/S 416 Heads, mini starter, XE268H cam, 2101 Intake, Distributor, +More
 

i'm waiting on my student refund, but i'm VERY interested in the mini starter. about how many miles are on it? my student refund should be in next week. willing to wait?

Re: F/S 416 Heads, mini starter, XE268H cam, 2101 Intake, Distributor, +More
 

TTT for today

Re: F/S 416 Heads, mini starter, XE268H cam, 2101 Intake, Distributor, +More
 

TTT for Today

Re: F/S 416 Heads, mini starter, XE268H cam, 2101 Intake, Distributor, +More
 

I know this was posted last month but do you still have any of this stuff... well, the starter?

Re: F/S 416 Heads, mini starter, XE268H cam, 2101 Intake, Distributor, +More
 

pm sent

Re: F/S 416 Heads, mini starter, XE268H cam, 2101 Intake, Distributor, +More
 

Let me know if you still have the cam