Complete 1987 Trans am, parting out
 

I have decided that parting my T/A would be the best move for me financially, so everything is up for grabs.

It has a L98 engine, mildly built 700r4, and a bw 9 bolt rear with 3.27 ratio. I am open to selling any parts needed, you name it.

On the engine: I was under the impression that I had blown a head gasket when coolant and white smoke went everywhere, predominately from the coolant resovior. My mechanic, who hasnt been wrong for me yet, told me it was the thermostat. I check it, and it was bad. Checked oil to be sure, no coolant in oil, smelled slightly burned, but nothing horrible. In the process of changing the thermostat, I broke a bolt off in the manifold and that B**** just won't come out for me. It also had a bad distributor, but I have a new one that I was going to install.

Feel free to ask any questions and make offers, I can send pics of anything upon request.

Re: Complete 1987 Trans am, parting out
 

I need the complete jack/spare with all mounting hardware.

Re: Complete 1987 Trans am, parting out
 

:hmmm: Those parts, I do not have. Took them out when I went to the track one day and never saw them again.:crazy:

Sorry about that.

Re: Complete 1987 Trans am, parting out
 

t/b and plenum?

Re: Complete 1987 Trans am, parting out
 

I'd take $85 plus shipping, including the tps sensor and iac valve. I aslo have a fully ported, but not siamiesed plenum, that has never been used and is powdercoated black that I could substitute in for an additional $35.

Re: Complete 1987 Trans am, parting out
 

Forgot to mention, I aslo have 4 15" chrome eagle claw rims with 4 nearly new tires (1 month of use as a weekend car) that I will sell as well.

Re: Complete 1987 Trans am, parting out
 

got a factory foglight wiring harness? headlights might be attached. but i dont need the relay or switch just wiring. if so how much to 06067?

Re: Complete 1987 Trans am, parting out
 

No foglight wiring harness either. I knew it wasn't 100% complete, but I didn't figure that I would be asked about the few things I don't have. Sorry guys, but at least now you know what I don't have.

Re: Complete 1987 Trans am, parting out
 

What do you want for the motor ? transmission ?
Where in southeast Texas are you located ?

Re: Complete 1987 Trans am, parting out
 

Looking for $500 for complete engine, needs just a the little probs fixed. and $600 for tranny. Prices are a bit high because I don't want/can't take them out myself :doh:. I would have to pay someone. I will do $1000 for them together, or will sell the whole car for $1000. Trying to get it gone pretty soon; really want that vette.

Make offers on anything you need

Re: Complete 1987 Trans am, parting out
 

price of both cylinder heads shipped to 08081?

Re: Complete 1987 Trans am, parting out
 

Do you have a quick ratio steering box? Price and shipping to 56754?

Re: Complete 1987 Trans am, parting out
 

Cylinder heads are still on car. I was hoping to not break apart the engine, rather I wanted to sell as a complete drop in. Will let you know if anything changes.

I couldn't tell you if I have a quick ratio box or not, nor do I know how to check, maybe you could help me with that. All I know is I drove it without Power steering hooked up and didn't have too much trouble with it.

Re: Complete 1987 Trans am, parting out
 

TTT

Re: Complete 1987 Trans am, parting out
 

It is a quick ratio if it has XH or WS stamped on it.

Re: Complete 1987 Trans am, parting out
 

Need a power antenna.

Re: Complete 1987 Trans am, parting out
 

P/M sent

Re: Complete 1987 Trans am, parting out
 

ebrake assembly and cables to 08884

Re: Complete 1987 Trans am, parting out
 

Guys, I'm going to have to get back to y'all on this a bit later, maybe I can get to it over the weekend. I am selling another car right now thats had a ton of hits, I just got the loan for the car I'm buying, and there's some buglary thing in our town right now that has stopped mail and locked all the schools down. I will get back to all of you as soon as I can.

Re: Complete 1987 Trans am, parting out
 

do you have the engine/tpi harness? how much shippped to 99403

Re: Complete 1987 Trans am, parting out
 

driver side tail light?

Re: Complete 1987 Trans am, parting out
 

Do you have the PCV breather setup still? (Valvecover elbow, hard line to throttle body, elbow for hard line, and hard line between the elbows)

Re: Complete 1987 Trans am, parting out
 

ECM with Prom Shipped to 61201 LMK