Complete 1987 Trans am, parting out

Thread Tools
 
Search this Thread
 
Old Jan 16, 2008 | 07:48 PM
  #1  
cwyates4's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2007
Posts: 87
Likes: 0
From: Southeast, Tx
Car: 85 vette/87 TA
Engine: built 383/350 tpi
Transmission: built 700r4s
Axle/Gears: 3.45 dana 44/ 3.27 9 bolt
Complete 1987 Trans am, parting out

I have decided that parting my T/A would be the best move for me financially, so everything is up for grabs.

It has a L98 engine, mildly built 700r4, and a bw 9 bolt rear with 3.27 ratio. I am open to selling any parts needed, you name it.

On the engine: I was under the impression that I had blown a head gasket when coolant and white smoke went everywhere, predominately from the coolant resovior. My mechanic, who hasnt been wrong for me yet, told me it was the thermostat. I check it, and it was bad. Checked oil to be sure, no coolant in oil, smelled slightly burned, but nothing horrible. In the process of changing the thermostat, I broke a bolt off in the manifold and that B**** just won't come out for me. It also had a bad distributor, but I have a new one that I was going to install.

Feel free to ask any questions and make offers, I can send pics of anything upon request.
Reply
Old Jan 17, 2008 | 05:35 AM
  #2  
426 Wedge's Avatar
Member
 
Joined: Oct 2007
Posts: 184
Likes: 0
From: South Jersey
Car: 86 WS6 TransAm
Engine: LG4 4BBL
Transmission: T5WC
Axle/Gears: 327
Re: Complete 1987 Trans am, parting out

I need the complete jack/spare with all mounting hardware.
Reply
Old Jan 17, 2008 | 04:26 PM
  #3  
cwyates4's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2007
Posts: 87
Likes: 0
From: Southeast, Tx
Car: 85 vette/87 TA
Engine: built 383/350 tpi
Transmission: built 700r4s
Axle/Gears: 3.45 dana 44/ 3.27 9 bolt
Re: Complete 1987 Trans am, parting out

Those parts, I do not have. Took them out when I went to the track one day and never saw them again.

Sorry about that.
Reply
Old Jan 17, 2008 | 06:29 PM
  #4  
rplettermen's Avatar
Junior Member
 
Joined: Feb 2007
Posts: 8
Likes: 0
Re: Complete 1987 Trans am, parting out

t/b and plenum?
Reply
Old Jan 17, 2008 | 07:56 PM
  #5  
cwyates4's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2007
Posts: 87
Likes: 0
From: Southeast, Tx
Car: 85 vette/87 TA
Engine: built 383/350 tpi
Transmission: built 700r4s
Axle/Gears: 3.45 dana 44/ 3.27 9 bolt
Re: Complete 1987 Trans am, parting out

I'd take $85 plus shipping, including the tps sensor and iac valve. I aslo have a fully ported, but not siamiesed plenum, that has never been used and is powdercoated black that I could substitute in for an additional $35.
Reply
Old Jan 18, 2008 | 05:33 PM
  #6  
cwyates4's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2007
Posts: 87
Likes: 0
From: Southeast, Tx
Car: 85 vette/87 TA
Engine: built 383/350 tpi
Transmission: built 700r4s
Axle/Gears: 3.45 dana 44/ 3.27 9 bolt
Re: Complete 1987 Trans am, parting out

Forgot to mention, I aslo have 4 15" chrome eagle claw rims with 4 nearly new tires (1 month of use as a weekend car) that I will sell as well.
Reply
Old Jan 18, 2008 | 09:39 PM
  #7  
vipershark11's Avatar
Supreme Member
iTrader: (6)
 
Joined: Apr 2005
Posts: 1,459
Likes: 2
From: CT
Car: 92 trans am clone
Engine: LO3
Transmission: 700r4
Re: Complete 1987 Trans am, parting out

got a factory foglight wiring harness? headlights might be attached. but i dont need the relay or switch just wiring. if so how much to 06067?
Reply
Old Jan 18, 2008 | 09:55 PM
  #8  
cwyates4's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2007
Posts: 87
Likes: 0
From: Southeast, Tx
Car: 85 vette/87 TA
Engine: built 383/350 tpi
Transmission: built 700r4s
Axle/Gears: 3.45 dana 44/ 3.27 9 bolt
Re: Complete 1987 Trans am, parting out

No foglight wiring harness either. I knew it wasn't 100% complete, but I didn't figure that I would be asked about the few things I don't have. Sorry guys, but at least now you know what I don't have.
Reply
Old Jan 18, 2008 | 10:09 PM
  #9  
kanmudhog's Avatar
Member
iTrader: (4)
 
Joined: Jul 2006
Posts: 106
Likes: 0
From: kansas
Car: 89 formula ws6
Engine: yes
Transmission: yes
Axle/Gears: both
Re: Complete 1987 Trans am, parting out

What do you want for the motor ? transmission ?
Where in southeast Texas are you located ?
Reply
Old Jan 18, 2008 | 11:11 PM
  #10  
cwyates4's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2007
Posts: 87
Likes: 0
From: Southeast, Tx
Car: 85 vette/87 TA
Engine: built 383/350 tpi
Transmission: built 700r4s
Axle/Gears: 3.45 dana 44/ 3.27 9 bolt
Re: Complete 1987 Trans am, parting out

Looking for $500 for complete engine, needs just a the little probs fixed. and $600 for tranny. Prices are a bit high because I don't want/can't take them out myself . I would have to pay someone. I will do $1000 for them together, or will sell the whole car for $1000. Trying to get it gone pretty soon; really want that vette.

Make offers on anything you need
Reply
Old Jan 19, 2008 | 12:38 PM
  #11  
Rich2279's Avatar
Senior Member
iTrader: (7)
 
Joined: Dec 2007
Posts: 618
Likes: 0
From: Williamstown, NJ
Car: '98 Mustang GT
Engine: '03 4.6L
Transmission: T45
Axle/Gears: DK
Re: Complete 1987 Trans am, parting out

price of both cylinder heads shipped to 08081?
Reply
Old Jan 19, 2008 | 01:08 PM
  #12  
CamaroKid89RS's Avatar
Member
iTrader: (1)
 
Joined: Feb 2005
Posts: 266
Likes: 0
From: Rapid City, SD
Car: 89 Camaro RS/SS
Engine: LT1
Transmission: T-56
Axle/Gears: 10 bolt with 3.42
Re: Complete 1987 Trans am, parting out

Do you have a quick ratio steering box? Price and shipping to 56754?
Reply
Old Jan 19, 2008 | 02:41 PM
  #13  
cwyates4's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2007
Posts: 87
Likes: 0
From: Southeast, Tx
Car: 85 vette/87 TA
Engine: built 383/350 tpi
Transmission: built 700r4s
Axle/Gears: 3.45 dana 44/ 3.27 9 bolt
Re: Complete 1987 Trans am, parting out

Cylinder heads are still on car. I was hoping to not break apart the engine, rather I wanted to sell as a complete drop in. Will let you know if anything changes.

I couldn't tell you if I have a quick ratio box or not, nor do I know how to check, maybe you could help me with that. All I know is I drove it without Power steering hooked up and didn't have too much trouble with it.
Reply
Old Jan 21, 2008 | 06:02 PM
  #14  
cwyates4's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2007
Posts: 87
Likes: 0
From: Southeast, Tx
Car: 85 vette/87 TA
Engine: built 383/350 tpi
Transmission: built 700r4s
Axle/Gears: 3.45 dana 44/ 3.27 9 bolt
Re: Complete 1987 Trans am, parting out

TTT
Reply
Old Jan 22, 2008 | 02:24 PM
  #15  
CamaroKid89RS's Avatar
Member
iTrader: (1)
 
Joined: Feb 2005
Posts: 266
Likes: 0
From: Rapid City, SD
Car: 89 Camaro RS/SS
Engine: LT1
Transmission: T-56
Axle/Gears: 10 bolt with 3.42
Re: Complete 1987 Trans am, parting out

Originally Posted by cwyates4
Cylinder heads are still on car. I was hoping to not break apart the engine, rather I wanted to sell as a complete drop in. Will let you know if anything changes.

I couldn't tell you if I have a quick ratio box or not, nor do I know how to check, maybe you could help me with that. All I know is I drove it without Power steering hooked up and didn't have too much trouble with it.

It is a quick ratio if it has XH or WS stamped on it.
Reply
Old Jan 22, 2008 | 03:48 PM
  #16  
426 Wedge's Avatar
Member
 
Joined: Oct 2007
Posts: 184
Likes: 0
From: South Jersey
Car: 86 WS6 TransAm
Engine: LG4 4BBL
Transmission: T5WC
Axle/Gears: 327
Re: Complete 1987 Trans am, parting out

Need a power antenna.
Reply
Old Jan 23, 2008 | 09:35 AM
  #17  
mike's91RS's Avatar
Junior Member
 
Joined: Feb 2004
Posts: 13
Likes: 0
From: Farley iowa
Car: 88 Monte Carlo LS
Engine: 305
Transmission: 200R4
Re: Complete 1987 Trans am, parting out

P/M sent
Reply
Old Jan 23, 2008 | 09:51 AM
  #18  
flyboy367's Avatar
Member
 
Joined: Nov 2001
Posts: 176
Likes: 0
From: Sayreville nj usa
Car: 02 redfire gtp coupe
Engine: 3.8 modded and supercharged
Transmission: 4t65-ehd
Re: Complete 1987 Trans am, parting out

ebrake assembly and cables to 08884
Reply
Old Jan 23, 2008 | 05:44 PM
  #19  
cwyates4's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2007
Posts: 87
Likes: 0
From: Southeast, Tx
Car: 85 vette/87 TA
Engine: built 383/350 tpi
Transmission: built 700r4s
Axle/Gears: 3.45 dana 44/ 3.27 9 bolt
Re: Complete 1987 Trans am, parting out

Guys, I'm going to have to get back to y'all on this a bit later, maybe I can get to it over the weekend. I am selling another car right now thats had a ton of hits, I just got the loan for the car I'm buying, and there's some buglary thing in our town right now that has stopped mail and locked all the schools down. I will get back to all of you as soon as I can.
Reply
Old Jan 24, 2008 | 11:19 PM
  #20  
mrtater99's Avatar
Junior Member
iTrader: (1)
 
Joined: Feb 2005
Posts: 89
Likes: 0
From: southeastern Wa.
Car: 89 RS.. 91 1/2ton 1500
Engine: 305 tbi
Transmission: 5 speed manual
Re: Complete 1987 Trans am, parting out

do you have the engine/tpi harness? how much shippped to 99403
Reply
Old Jan 26, 2008 | 12:44 AM
  #21  
speedingpenguin's Avatar
Senior Member
iTrader: (1)
 
Joined: Jun 2003
Posts: 955
Likes: 0
From: MA
Car: 1981 Chevy Malibu, 1987 Formula 350
Engine: 229 V6, L98 TPI 350
Transmission: TH350, 700R4
Axle/Gears: 10 bolt ???, 9 bolt 3.27 posi
Re: Complete 1987 Trans am, parting out

driver side tail light?
Reply
Old Jan 27, 2008 | 10:59 AM
  #22  
MP81's Avatar
Member
 
Joined: Jul 2007
Posts: 248
Likes: 0
From: Michigan
Car: 2007 Cobalt LT
Engine: M62'd 2.2L L61
Transmission: 4T45E 4-speed Automatic
Axle/Gears: Stock
Re: Complete 1987 Trans am, parting out

Do you have the PCV breather setup still? (Valvecover elbow, hard line to throttle body, elbow for hard line, and hard line between the elbows)
Reply
Old Jan 28, 2008 | 11:04 AM
  #23  
IrocZ85's Avatar
Banned
iTrader: (10)
 
Joined: Sep 2005
Posts: 795
Likes: 2
From: IL
Re: Complete 1987 Trans am, parting out

ECM with Prom Shipped to 61201 LMK
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
Jun 13, 2021 01:13 PM
Casey Meyers
Interior Parts for Sale
8
Mar 2, 2016 10:46 AM
beachrodder
Tech / General Engine
7
Aug 25, 2015 08:05 AM
1nastygta
Firebirds for Sale
2
Aug 8, 2015 07:38 PM
rh76camaro
Exterior Parts for Sale
0
Aug 6, 2015 08:57 AM




All times are GMT -5. The time now is 03:32 AM.