LT1 T-56 - Rebuilt to 800hp Viper spec 3 Attachment(s) SOLD A 1995 LT1 core unit. Viper 30-spline mainshaft, machined to Fbody length. Fbody tailhousing, bored/sleeved for larger viper output shaft. Rebuilt to 800+ lb-ft TQ rating MM6 gear ratios Carbon-fiber synchro blockers on all gears. Carbon-fiber synchro on REVERSE (No more bronze grinding) Steel 3/4 shift fork. Upgraded viper-spec 2nd gear. Billet synchro keys on 1/2, 3/4, 5/6 synchros, new OEM keys on Rev. Bronze shift fork pads on all (1/2, 3/4, 5/6, Rev) shift forks Performance shimming on mainshaft and countershaft. Brand new 30-spline viper yoke to 1350 u-joint, included. Rebuild fully photo-documented. Pictures sent upon request. Includes LT1 Bellhousing, clutch fork, and slave spacer. $2200 + PP fees + S/H (Averages about $130) or meet within 100mi of 19711. Attachment 172866 Attachment 172868 Attachment 172871 |
Re: LT1 T-56 - Rebuilt to 800hp Viper spec Over $2,000 worth of parts in this unit.. You won't find a trans at this strength level, with all the upgrades, from any of the big shops.. No core charge or shipping your trans in either. |
Re: LT1 T-56 - Rebuilt to 800hp Viper spec Would kill to have a tranny already built. Don't have that much cash on hand right now. Is there anything you would be willing to take in trade plus cash for the tranny. Thanks Collier |
Re: LT1 T-56 - Rebuilt to 800hp Viper spec Price reduced |
Re: LT1 T-56 - Rebuilt to 800hp Viper spec |
Re: LT1 T-56 - Rebuilt to 800hp Viper spec Sold Original Post updated |
Re: LT1 T-56 - Rebuilt to 800hp Viper spec Do you have another one of these available if not stronger? |
Re: LT1 T-56 - Rebuilt to 800hp Viper spec PM sent. |
All times are GMT -5. The time now is 10:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands