COMP XE-268+Lifters I have a COMP XE-268 hydraulic flat tappet cam, specs are 268/281 advertised, 224/231 @ .050 with .477"/.480" lift using 1.5 rockers ground on a 112 lobe seperation angle. Have the matching COMP high energy lifters. These have around 3,000 miles on them and were broken in properly with cam break in lube. A set of 16 COMP High Energy stock 7.8" length pushrods with same mileage as cam/lifters COMP guideplates for 3/8 studs have like 30 miles on them, RHS said the heads needed them but they didnt. $200 Shipped for all need it gone! |
Re: COMP XE-268+Lifters Bump |
Re: COMP XE-268+Lifters Bump |
Re: COMP XE-268+Lifters TTT |
Re: COMP XE-268+Lifters did you use any of this as a combo with the torker heads |
Re: COMP XE-268+Lifters Bump!! |
Re: COMP XE-268+Lifters TTT |
Re: COMP XE-268+Lifters Bump $200 shipped! |
Re: COMP XE-268+Lifters TTT |
Re: COMP XE-268+Lifters Bump!!! |
Re: COMP XE-268+Lifters TTT $200 shipped for everything I need it gone. |
Re: COMP XE-268+Lifters ttt |
Re: COMP XE-268+Lifters bump |
Re: COMP XE-268+Lifters Hey, just saw this thread. Do you still have the cam and lifters? |
All times are GMT -5. The time now is 05:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands