355 HSR/700r4 combo I'm selling my complete engine and tranny setup. Here are the details. 355 L98 - 5000 miles. - $500 all clearances checked, rebuilt with new crank, rod, and cam bearings, hyper pistons and rings. The crank was ground and polished. 10.5:1 compression lt4 hotcam .525/.525 224/224 holley stealthram - $700 - kirban performance billet aluminum adjustable fuel pressure regulator - stock 48mm TB with airfoil - fuel pressure gauge mounted to the rails - Braided stainless lines to run to the stock hard lines (you have to buy two fittings for the stock fuel lines) - no fuel injectors - new set of felpro 1205 intake gaskets 113 aluminum vette heads - $800 ($950 with the rockers) - 18 hours of porting and polishing - 2.02/1.56 valves machined in - manley titanium race valves with 7 angle valve job - zz9 springs good to .550 lift - screw in studs with pushrod guide plates - 1.6 full roller rockers march serpentine system with underdrive pullies. - $300 Hooker super competition long tube headers, jet hot coated (piss poor coating if you ask me) with custom 3 inch y pipe. They have some rust and scratches but work awesome - $600 700r4 tranny - SOLD - phoenix racing 2500 stall torque converter - transgo shift kit - corvette servo and .500 boost valve 90 speed density ecm and 87 custom wiring harness - $150 - already has the prom adapter to throw on your own chips - setup for no AC, no smog - converted to heated o2, 90+ style relays - the fans run in parallel from the computer, when one fan comes on they both come on Summit racing high torque mini starter - 100$ stock 87 tpi small cap distributor with new gear, pickup, ICM, has msd cap and button - 100$ I will upload pictures in the next day or two when I get everything cleaned up. Everything is out of the car and ready to be pulled apart. |
Re: 355 HSR/700r4 combo Do you are sure this tranny can handle the power of that engine? |
Re: 355 HSR/700r4 combo Nice setup you have for sale.If someone is looking to upgrade their stock Camaro this would be an excellent buy. |
Re: 355 HSR/700r4 combo
Originally Posted by Jose Zuñiga
(Post 5709170)
Do you are sure this tranny can handle the power of that engine? |
Re: 355 HSR/700r4 combo Let me know if u will part out im looking 4 a HSR complete and roller rockers |
Re: 355 HSR/700r4 combo
Originally Posted by CashMunson
(Post 5710793)
I honestly don't know, it has so far. It might not last if I was launching at 4k rpm with slicks. I asked because I have a similar engine but my 700r4 is stock, so I'm looking whats parts have to buy for build my trans ready for handle like 380 rwhp. :driving: |
Re: 355 HSR/700r4 combo 3 Attachment(s) Here are some pictures of the engine sitting in the car still. |
Re: 355 HSR/700r4 combo Would u sell just trans |
Re: 355 HSR/700r4 combo I will if I can find somebody to buy just the engine. |
Re: 355 HSR/700r4 combo If you were interested in selling the car as well, i'm looking for something complete... not far from Ravenna |
Re: 355 HSR/700r4 combo
Originally Posted by Ymesss
(Post 5723220)
If you were interested in selling the car as well, i'm looking for something complete... not far from Ravenna |
Re: 355 HSR/700r4 combo If you decide to part out I would like to get inline for the intake. |
Re: 355 HSR/700r4 combo I might be interested in the long block and intake (no headers, ecu, trans, etc) for the right price |
Re: 355 HSR/700r4 combo
Originally Posted by maradits
(Post 5725214)
I might be interested in the long block and intake (no headers, ecu, trans, etc) for the right price |
Re: 355 HSR/700r4 combo
Originally Posted by sidwyz
(Post 5723615)
If you decide to part out I would like to get inline for the intake. |
Re: 355 HSR/700r4 combo Updated this with prices for everything |
Re: 355 HSR/700r4 combo
Originally Posted by CashMunson
(Post 5726024)
I am definitely parting everything out. Are you still interested in the hsr? I'm selling the hsr complete except for the injectors. |
Re: 355 HSR/700r4 combo
Originally Posted by 3rdgenzroc
(Post 5728376)
Just bought a 383 and need a HSR set-up (already have 30lb injectors)-this has regular alum. heads on it. 383 is (atk from summit), is your HSR made for this style? I am interested in it if it is.:thumbsup: |
Re: 355 HSR/700r4 combo I bought a roller block from summit. It is the HP36 (atk brand). 425 hp and 465 tq (I think w\out looking at paperwork). Gen 1 4bolt 1pc RMS. They are not specific on the heads, I've seen them with dart, edelbrock, and some other brand of aluminum head on this specific engine. I have been waiting to find out specifically which head it will be, but haven't heard from them yet, nor has the engine showed up yet, but I want a HSR set up on this, just haven't bought one yet because of not knowing which style to get. |
Re: 355 HSR/700r4 combo Unless the heads are vortec heads, my hsr will bolt up. If you get vortec heads with the new motor then you'll have to run the vortec hsr. |
Re: 355 HSR/700r4 combo 2800 for everything, need this stuff gone. |
Re: 355 HSR/700r4 combo HSR priced to high pm me if u want a sale I just need intake no TB no gaskets |
Re: 355 HSR/700r4 combo
Originally Posted by Sojer
(Post 5733238)
HSR priced to high pm me if u want a sale I just need intake no TB no gaskets Remember you can't use your stock tpi fuel lines to hook an hsr up, you have to make your own. Mine comes with everything you need to bolt it right to the factory hard lines. |
Re: 355 HSR/700r4 combo Tranny is sold. |
Re: 355 HSR/700r4 combo bump to the top. 2500 for everything. |
Re: 355 HSR/700r4 combo Make offers, need this stuff gone. |
Re: 355 HSR/700r4 combo Man if you were closer id scoop up that 355 block, bump for you! |
Re: 355 HSR/700r4 combo weekend bump. Somebody make an offer on some of this stuff. If you want pictures of something let me know and i will get them. |
Re: 355 HSR/700r4 combo to the top |
Re: 355 HSR/700r4 combo I need a ECM!! |
Cash , I remember you from the old ne3g days. How far are you from Parkersburg? Interested in the 355 |
Re: 355 HSR/700r4 combo pm sent |
Re: 355 HSR/700r4 combo bump, still for sale |
All times are GMT -5. The time now is 08:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands