fs LS front brake conversion
 

includes full calipers, brackets, modified spindles and rotors. you would need hubs or have your rotors cut down.
$225 plus shipping please text for pictures 630 659 8879

Re: fs LS front brake conversion
 

care to elaborate please? :)

Re: fs LS front brake conversion
 

you would need these which can be made by cutting a stock rotor or purchasing them pre made

Re: fs LS front brake conversion
 

thanks, so i gather the hub mating face to the rotor is a different thickness than on our 3rdgen hubs?

Re: fs LS front brake conversion
 

Third gens don't have a separate hub. It is cast integral with the rotor, so the hub/bearings/rotor/studs come as one unit if you replace factory with factory. Fourth gens have separate hubs & rotors, but those hubs won't fit third gen cars, thus the need to modify the third gen hub/rotor casting into a "hub only". This requires cutting the "rotor" portion off, leaving only the "hub" portion to be used in conjunction with the parts he is selling. Hope this helps.

Re: fs LS front brake conversion
 

Ill buy this kit. Pm'd..

Re: fs LS front brake conversion
 

pm replied

Re: fs LS front brake conversion
 

Can you use non-1LE rotors to make hubs, or must use 1LE rotors?

Re: fs LS front brake conversion
 

Depends on what brakes you're going to use. I know C4 HD requires 1LE but from what I've read most others (including LS1) don't. Check lukeskaff.com for lots of great info including hub making. You can get hubs from flynbye.com

Re: fs LS front brake conversion
 

still avail?

Re: fs LS front brake conversion
 

interested, do you still have this?