Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Engine/Drivetrain/Suspension Parts for Sale (https://www.thirdgen.org/forums/engine-drivetrain-suspension-parts/)
-   -   [Sold] Accel DFI Gen 6 74022-A (https://www.thirdgen.org/forums/engine-drivetrain-suspension-parts/731402-accel-dfi-gen-6-a.html)

MarkF 04-05-2016 02:46 PM

Accel DFI Gen 6 74022-A
 
7 Attachment(s)
Price drop to $290 OBO

Selling a very complete Accel DFI Gen 6 engine management system. Was working properly when upgraded to Gen 7. Some of the harness wires were shortened and tucked into the loom to clean things up, for example knock and O2 sensor connections. Everything seems to be labeled well. Includes the following items:

DFI ECM batch fire part# 74022-A
Engine harness
Fuel injector harness which plugs into main
Calibration interface cable for laptop (old school serial port)
Cockpit A/F ratio controller, allows on the fly adjustment for idle and WOT
Calmap software version 6.0 and 6.32 provided via digital transfer, also latest version on floppy disk
User's guide
Museum quality laptop :lol: with a good old fashioned serial port that will work right out of the box but getting data in and out of the computer is a challenge without using floppy disks. There are usb to serial adapters out there that can be used however newer laptops might require some tweaking to get them to work.

Not seeing a lot of these on ebay and elsewhere so not sure how best to price it, I'll adjust as I go. How about $320 or best offer?

MarkF 04-16-2016 10:28 AM

Re: Accel DFI Gen 6 74022-A
 
bump

project89 04-17-2016 10:30 PM

Re: Accel DFI Gen 6 74022-A
 
does this work with boost and low -z injectors?

MarkF 04-18-2016 08:15 AM

Re: Accel DFI Gen 6 74022-A
 
Does work with boost you just need to get the right Map sensor that covers your manifold pressure range. I'm fairly certain it won't do low impedance but there's a separate box that accel sold which you could put between ECU and injectors to do that. I saw it on ebay a week ago but it's gone now. I found a link that talks a little bit about low impedance:

http://autofuelcontrol.com/acceldfi-...3i-74045-accel

project89 04-18-2016 01:31 PM

Re: Accel DFI Gen 6 74022-A
 
probably just a resitor pack not a big deal i can source my own if i cant come up with high-z injectors

im on lunch break from work atm but when i get home tonight ill pm ya an offer on iit would be nice to try out a system other then megasquirt on one of my builds for once

ragtopday_z28 05-26-2016 06:02 PM

Re: Accel DFI Gen 6 74022-A
 
Is this still available?

MarkF 05-26-2016 10:03 PM

Re: Accel DFI Gen 6 74022-A
 
Sorry it's sold


All times are GMT -5. The time now is 02:26 PM.


© 2024 MH Sub I, LLC dba Internet Brands