Wtb/sbc hydrauluic roller cam
 

I am looking for a nice cam i can use with a carb setup and the stock roller lifters.

I have a blue racer roller hydraulic for factory roller block.. It came with a motor I bought. But I decided to pull it to go with a solid roller unit.. I have the cam, lifters, spider, links, and thrust plate.. I do not have the spec card for the cam but the grind number is 960840.. The cam was never ran but was oiled and installed. $150 for everything..

Josh
215-783-4645

I have a stock 92 L98 cam if you are interested.

got a zz9 cam from TPIS has about 3000 miles on it make an offer

i have a comp cams 286hr10,its sweet
230/230 560/560 110* it has less than 2000mi.on it 150.00
i have lifters,holders and spider tray that can come with the
cam.

i have a comp cams 305h new was installed but never ran with lifters 75 shipped