Wtb/sbc hydrauluic roller cam

Reply Subscribe

Thread Tools

Search this Thread

Sep 6, 2006 | 10:20 PM

Fast83z28

Thread Starter

Junior Member

Joined: Aug 2002

Posts: 2

Likes: 0

Car: 83z28

Engine: 350

Transmission: t-5

Wtb/sbc hydrauluic roller cam

I am looking for a nice cam i can use with a carb setup and the stock roller lifters.

Sep 6, 2006 | 11:26 PM

FORMULA355TPI

Member

Joined: May 2002

Posts: 292

Likes: 0

From: BENSALEM, PA

Car: 88 FORMULA / 88 IROC

Engine: 355 / 355

Transmission: T5 / TH400

Axle/Gears: 10 Bolt-3.73 / 9"-3.90

I have a blue racer roller hydraulic for factory roller block.. It came with a motor I bought. But I decided to pull it to go with a solid roller unit.. I have the cam, lifters, spider, links, and thrust plate.. I do not have the spec card for the cam but the grind number is 960840.. The cam was never ran but was oiled and installed. $150 for everything..

Josh
215-783-4645

Sep 7, 2006 | 08:21 AM

bluegrassz

Supreme Member

iTrader: (3)

Joined: Jan 2002

Posts: 3,449

Likes: 7

From: LONDON, KY

Car: Camaro

Engine: Carbed L98

Transmission: TH350

Axle/Gears: 3.73

I have a stock 92 L98 cam if you are interested.

Sep 7, 2006 | 09:02 PM

badazta87

Member

iTrader: (1)

Joined: Oct 2004

Posts: 105

Likes: 0

From: Uniontown, OH

Car: 87 GTA

Engine: Under Construction

Axle/Gears: 3.70:1

got a zz9 cam from TPIS has about 3000 miles on it make an offer

Sep 8, 2006 | 02:04 PM

92droptopws6

Senior Member

iTrader: (10)

Joined: Jun 2004

Posts: 918

Likes: 31

From: Las Vegas

Car: '88 Trans Am

Engine: 5.7L TPI

Transmission: Slushbox

Axle/Gears: 3.27

i have a comp cams 286hr10,its sweet
230/230 560/560 110* it has less than 2000mi.on it 150.00
i have lifters,holders and spider tray that can come with the
cam.