WTB Vortec Heads/TPI conversion/Cam Kit I have a 350 TBI currently. looking to upgrade to Vortec heads, TPI intake, Harness, ECU, Etc. (might consider HSR for the right price?), and a nice cam to go with. if you have parts? I have money. Let me know what you have? I'm from the DFW area for any locals, btw. |
Re: WTB Vortec Heads/TPI conversion/Cam Kit I've got a set of Vortecs but they need to be built. Typical freshing up.....vatting, valve job and possible surface facing. I do have a new set of Manley valves, Comp springs/retainers to go with them. $280 plus ship? Dallas isn't horribly far. Grey Hound shipping might be an option. |
Re: WTB Vortec Heads/TPI conversion/Cam Kit
Originally Posted by wesilva
(Post 5670444)
I've got a set of Vortecs but they need to be built. Typical freshing up.....vatting, valve job and possible surface facing. I do have a new set of Manley valves, Comp springs/retainers to go with them. $280 plus ship? Dallas isn't horribly far. Grey Hound shipping might be an option. PM'ed |
Re: WTB Vortec Heads/TPI conversion/Cam Kit I'm in dfw area and I have several tpi and gm hot cam if your still looking |
Re: WTB Vortec Heads/TPI conversion/Cam Kit I have reconditioned vortecs for $200 and good used vortecs for $150. Plus shipping. |
Re: WTB Vortec Heads/TPI conversion/Cam Kit
Originally Posted by 86blackiroc
(Post 5673919)
I have reconditioned vortecs for $200 and good used vortecs for $150. Plus shipping. i'd be interested in one of those |
Re: WTB Vortec Heads/TPI conversion/Cam Kit I have tpi setup with Auto harness 325 for everything |
Re: WTB Vortec Heads/TPI conversion/Cam Kit
Originally Posted by mjdavis68
(Post 5673936)
i'd be interested in one of those |
Re: WTB Vortec Heads/TPI conversion/Cam Kit
Originally Posted by mygta87
(Post 5673969)
I have tpi setup with Auto harness 325 for everything |
Re: WTB Vortec Heads/TPI conversion/Cam Kit I'm looking more into a TPI Setup now if anyone has a complete 90-92 SD TPI setup. that's my main interest right now. I'm swapping from 1991 TBI 350. |
Re: WTB Vortec Heads/TPI conversion/Cam Kit I've got a SD harness and the ECM,...... but no chip, Stock air cleaner too. Sorry but my other TPI stuff is MAF ! http://berlinetta.info/temp/TPI85-86Stuff4.JPG :driving: |
Re: WTB Vortec Heads/TPI conversion/Cam Kit I have the memcal, send me a pm if interested :) |
Re: WTB Vortec Heads/TPI conversion/Cam Kit I'm back, Still looking for a 90-92 SD TPI Setup (Complete Intake, wiring, ecu, etc) and a Heads/Cam setup. let me know what you have? DFW Texas Area. |
Re: WTB Vortec Heads/TPI conversion/Cam Kit 2 Attachment(s) I realize it's not on your short list but just an FYI.... I have a very nice set of Comp Cams Pro-Magnum roller rockers in a 1.52/1.6 combo. They fit nicely under the magnesium Corvette valve covers. I had this combination on my Vortec heads. The valve covers have been milled for clearance and the oil separator removed. The Edelbrock breather now has that function. Not shown is the oil filler cap which I do have. PM is interested. |
Re: WTB Vortec Heads/TPI conversion/Cam Kit Still got an SD (auto) harness and factory air cleaner,... pretty sure the ECM is gone. :driving: |
Re: WTB Vortec Heads/TPI conversion/Cam Kit
Originally Posted by WoodenRegent
(Post 5736071)
I'm back, Still looking for a 90-92 SD TPI Setup (Complete Intake, wiring, ecu, etc) and a Heads/Cam setup. let me know what you have? DFW Texas Area. I have a brand new never used scoggin dickey vortec tpi lower intake baseplate. also have a set of new, never used SLP high flow runners. let me know if any of this interests you... |
Re: WTB Vortec Heads/TPI conversion/Cam Kit I'm not looking to piece anything together. just looking for the complete TPI intake. |
Re: WTB Vortec Heads/TPI conversion/Cam Kit I have a complete setup from a 1992 z28 that i am doing an ls1 swap in that i would sell. The complete intake, wiring harness and computer for $450 plus shipping. It is from a 305 motor. |
Re: WTB Vortec Heads/TPI conversion/Cam Kit I have a complete SDPC lower Vortec intake, SLP ported runners, port matched plenum with stock fuel rails, 24 lb fuel injectors, BBK adjustable fuel pressure regulator. Let me know if you are interested. Kevin |
Re: WTB Vortec Heads/TPI conversion/Cam Kit I know it's an old post but do you still have the SDPC tpi vortec lower intake still for sale and if so how much shipped to 72104. Ended up with some fast burns and I think they require a vortec intake due to the high ports. |
Re: WTB Vortec Heads/TPI conversion/Cam Kit I have a sdpc base plate for vortec heads and tpi . with adjustable fuel pressure regulator. no throttle body. Just replaced it with stealth ram |
Re: WTB Vortec Heads/TPI conversion/Cam Kit
Originally Posted by freaks87roc
(Post 6119180)
I have a sdpc base plate for vortec heads and tpi . with adjustable fuel pressure regulator. no throttle body. Just replaced it with stealth ram I may be interested in the base plate, if the earlier poster isn't interested. |
Re: WTB Vortec Heads/TPI conversion/Cam Kit I still have it and i have not received any other interest in it |
All times are GMT -5. The time now is 06:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands