TPI parts wanted would love to find heads up tpi system, as complete as possible all sensors/wiring ecm/ fuel lines/ injectors/ heads/ intake whole shi-bang would be great |
Re: TPI parts wanted I've got some TPI stuff; https://www.thirdgen.org/forums/engi...injection.html Got some heads, https://www.thirdgen.org/forums/engi...-cylinder.html and ECM, some used injectors, ect........ The only TPI harness I've got right now is an 85 TPI harness. :driving: |
Re: TPI parts wanted Ive got a bunch of tpi stuff as well i have a complete setup with ecm n harness off a 87 auto gta transam 300 and another setup off a 89 iroc 5 spd with harness for 400. |
Re: TPI parts wanted
Originally Posted by mygta87
(Post 5711739)
Ive got a bunch of tpi stuff as well i have a complete setup with ecm n harness off a 87 auto gta transam 300 |
Re: TPI parts wanted I got a complete eng, 145k, with all accessories, hardness, ecm Still in the car..you can hear it run, real good condition..700$ |
Re: TPI parts wanted I have a 86 automatic harness and ecm if your wanting to go tpi maf. Or ecms and memcals for speed density |
Re: TPI parts wanted I'm fine with MAF doing it more for mpg and style then hp. ive gotta say though i figured with the popularity of carb swaps and ls upgrades tpi stuff would be cheaper. not complaining though |
Re: TPI parts wanted
Originally Posted by kmcn47
(Post 5712029)
I'm fine with MAF doing it more for mpg and style then hp. ive gotta say though i figured with the popularity of carb swaps and ls upgrades tpi stuff would be cheaper. not complaining though |
Re: TPI parts wanted
Originally Posted by wheelboy
(Post 5711824)
I got a complete eng, 145k, with all accessories, hardness, ecm Still in the car..you can hear it run, real good condition..700$
Originally Posted by wheelboy
(Post 5712034)
I forgot!! My swap is MAF!! |
Re: TPI parts wanted
Originally Posted by kmcn47
(Post 5712038)
would you be willing to part with just the upper and lower intake/rails/inject/tb/harness/ecm? and for less then 700 lol But i have to remove all and make sure that nothing brakes!! I can do 600$ for all..save you 100 for gas |
Re: TPI parts wanted Where in Ohio are you. I have a complete 305 from a 1992 z28 that locked up. I am in the middle of an Ls1 swap and will sell all the parts you should need. It is a speed density set up though. |
Re: TPI parts wanted I got a complete 88 gta needs a trans sell whole car 900 |
Re: TPI parts wanted I have a new Painless 60102 TPI MAF harness in original box I never used. $350 free shipping. |
All times are GMT -5. The time now is 03:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands